Pages: [1]
Author Topic: Audi a8 3.3 tdi how to disable immo  (Read 3995 times)
aleks19411
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 60


« on: February 21, 2019, 07:08:00 AM »

Hello! Tell me how to disable immo on audi a8 3.3 tdi edc15, the machine has two ecu, master and slave. I read the dump with the Eprom master ecu, and no matter how many rules, the car starts and stalls. Immo sign blinks. I attach the original dump.
Logged
aleks19411
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 60


« Reply #1 on: March 11, 2019, 03:46:44 AM »

solution found by program
 immodecoding Smiley
Logged
Kompiesto
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 109


« Reply #2 on: March 13, 2019, 01:05:05 PM »

IUD? For me doesnt work. I had same car in past. Can You send eep file before and after? Works in car?

Logged
elektronik13
Full Member
***

Karma: +10/-32
Offline Offline

Posts: 198


« Reply #3 on: March 22, 2019, 03:59:11 PM »

solution found by program
 immodecoding Smiley

immo offf
Logged
aleks19411
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 60


« Reply #4 on: April 30, 2019, 02:36:18 PM »

IUD? For me doesnt work. I had same car in past. Can You send eep file before and after? Works in car?


Yes! This program disables the immo not in the eprom but in the flash memory. Apparently the feature of ecu
Logged
aleks19411
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 60


« Reply #5 on: April 30, 2019, 02:40:45 PM »

IUD? For me doesnt work. I had same car in past. Can You send eep file before and after? Works in car?


yes everything works .. I had to recalculate checksums after operations
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)