RSC
Full Member
Karma: +0/-24
 Offline
Posts: 73
|
 |
« on: March 20, 2019, 02:14:03 PM »
|
|
|
Hi! the problem appear after i changed the turbo and maf (k03 hybrid with k04 internals and 3 inch maf housting and my stock maf senzor)
the problem is next: when i,m at idle esp light is on and my dtc is maf signal to high,, i transfered the mlhfm values from a bam file in my bin, i transfered the kfmldmx values too, is a bosch maf sensor, mlofs is 200 like in the bam file,i increased the mlmax to 950 , the only maps wich is stock is kfkhfm and fkkvs, and i stil have this dtc, i tried to flat kfkhfm at 1 but still have that fucking error
if i add back the `stock` file (not touched in maf area) and the bigger housting fitted i dont have that dtc at idle
i attached the `stock` bin, the kp and the tuned bin in maf area and a log
Thank you so much!
|
|
|
|
|
Logged
|
|
|
|
RSC
Full Member
Karma: +0/-24
Offline
Posts: 73
|
|
« Reply #1 on: March 22, 2019, 04:08:18 PM »
|
|
|
I have now the s3 housting and senzor ,the s3 mlhfm ,kfmldmx increased ,mlmax 950, mlofs 200 (the maf to high is still there ) !!!the lamda adaptation is ~22% no metter if the maf is plugged or removed ,same adaptation ! Please someone help me !!! The maf reading at idle is 3.6 g/s ,wich looks ok for me ,the lamda adaptation i dont understand why and why maf tobhigh dtc and why in the wot ,maf is reading bad values
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #2 on: March 23, 2019, 08:44:29 AM »
|
|
|
You're way past the end of your boost sensor. Don't do that
Also, log ps_w
|
|
|
|
« Last Edit: March 23, 2019, 08:46:38 AM by nyet »
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
|
IamwhoIam
|
|
« Reply #3 on: March 23, 2019, 08:59:49 AM »
|
|
|
Copying other people's modifications blindly isn't a great idea. Also, some maps in the file are so badly defined that your engine ends up running totally retarded. I'd suggest reading the S4 wiki tuning from scratch and abandoning the mods seen in other people's tunes, especially if you don't understand why those changes were made to begin with.
|
|
|
|
« Last Edit: March 23, 2019, 09:02:02 AM by IamwhoIam »
|
Logged
|
I have no logs because I have a boost gauge (makes things easier)
|
|
|
|
IamwhoIam
|
|
« Reply #4 on: March 23, 2019, 09:05:35 AM »
|
|
|
None of the files you posted is stock by the way
|
|
|
|
|
Logged
|
I have no logs because I have a boost gauge (makes things easier)
|
|
|
RSC
Full Member
Karma: +0/-24
Offline
Posts: 73
|
|
« Reply #5 on: March 23, 2019, 05:10:11 PM »
|
|
|
I didnt copied the file ,this is maded by me ,the only maps i copied is mlhfm kfmldmx for maf ,from a stock sw ,but i have this dtc ,maf to high ,and if i add the s3 sw i dont have the dtc ,the lamda adaptation is still 24 when is hot
|
|
|
|
|
Logged
|
|
|
|
RSC
Full Member
Karma: +0/-24
Offline
Posts: 73
|
|
« Reply #6 on: March 24, 2019, 11:03:40 AM »
|
|
|
Can someone help me to understand how to remove dtc ?i have a maf to high error and i want to remove it ! Thank you !
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #7 on: March 24, 2019, 03:59:06 PM »
|
|
|
Don't go over your MAP limit. DO NOT BLINDLY DISABLE DTCs just because you have no idea what is going on.
|
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
|
nyet
|
|
« Reply #8 on: March 24, 2019, 04:01:01 PM »
|
|
|
Did you even read my post?
|
|
|
|
|
Logged
|
ME7.1 tuning guideECUx PlotME7Sum checksumTrim heatmap toolPlease do not ask me for tunes. I'm here to help people make their own. Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
|
|
|
RSC
Full Member
Karma: +0/-24
Offline
Posts: 73
|
|
« Reply #9 on: March 25, 2019, 01:42:52 AM »
|
|
|
Did you even read my post?
what post are you talking about ? |
|
|
|
|
Logged
|
|
|
|
RSC
Full Member
Karma: +0/-24
Offline
Posts: 73
|
|
« Reply #10 on: March 25, 2019, 02:38:46 AM »
|
|
|
I want to understand how to make a mafless and how it work and with map ober limit this didnt scared me becouse my actual afr is meeting requested most of tuned file from the best tunner from our country are on map over limit ,that didnt scared me but i want to understan ! Thank you
|
|
|
|
|
Logged
|
|
|
|
|
IamwhoIam
|
|
« Reply #11 on: March 25, 2019, 04:53:30 AM »
|
|
|
LOL your file is full of mods made by MTM for instance but you never copied anything muhahahahaha
|
|
|
|
|
Logged
|
I have no logs because I have a boost gauge (makes things easier)
|
|
|
fknbrkn
Hero Member
Karma: +186/-24
 Online
Posts: 1455
mk4 1.8T AUM
|
|
« Reply #12 on: March 25, 2019, 05:42:39 AM »
|
|
|
Can someone help me to understand how to remove dtc ?i have a maf to high error and i want to remove it ! Thank you !
do you wanna end up like one of those 737s ? |
|
|
|
|
Logged
|
|
|
|
RSC
Full Member
Karma: +0/-24
Offline
Posts: 73
|
|
« Reply #13 on: March 25, 2019, 05:46:40 AM »
|
|
|
LOL your file is full of mods made by MTM for instance but you never copied anything muhahahahaha
i didnt copied ,the car becomes with that mods ,i just want to make this sw maflessand how to delete dtc |
|
|
|
|
Logged
|
|
|
|
RSC
Full Member
Karma: +0/-24
Offline
Posts: 73
|
|
« Reply #14 on: March 25, 2019, 05:57:59 AM »
|
|
|
do you wanna end up like one of those 737s ?
what 737’s is ? |
|
|
|
|
Logged
|
|
|
|
|
