Pages: [1]
Author Topic: Help w/ Audi S6 C5 manual 559e file ?  (Read 3340 times)
Rollerton
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« on: April 12, 2019, 12:40:35 PM »

Hey gang. Go easy on me, I'm not typically a numbskull and could use a review of this file. I was given this file a few years ago but the benevolent Daz (R.I.P) and have used it successfully once or twice. But the last couple times I have tried to use it, it writes fine, no errors, nothing strange at all.
Write flash, toggle ignition start car and it's GREAT. ---> However, the next time I cycle the key I lose ECU comms all together. Check engine light goes missing. No talking to ECU via OBD. I am able to backtrack and by removing the ECU and disconnecting it for a few seconds and reconnecting-- if I quickly connect to the ECU RIGHT WHEN I turn the key on it will connect and I can write a different file.
Car will also start that one time, then cycle ignition again and no comms.
I used the slick little binary checker tool stickied here and it says it found 4 errors!

Does anyone have a minute to glance of this and see if the problem is obvious?
Mucho Gracias my friends, ...
cheers
Robert
Logged
Rollerton
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #1 on: April 14, 2019, 09:40:11 AM »

Nobody? Bueller..?


No love?  I’ve tried the ME7sum tool but I can’t get it to output any corrected .bin.
I probably don’t understand how it works.
Logged
mdz
Full Member
***

Karma: +12/-1
Offline Offline

Posts: 73


« Reply #2 on: April 14, 2019, 11:47:22 AM »

Me7sum is command line tool, there's no graphical interface. You must run it in command prompt "me7sum name of the file.bin name of fixed file.bin"

Try this, should be ok.

C:\Users\ Cool \Desktop>me7check 559ecorr.bin
==============================================================================
me7check v1.08 (c) mki, 06/2004-04/2011
Checking file 559ecorr.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 06.02
-> EPK = 42/1/ME7.1.1/5/8001.07//23h/Dst03o/040800//
-> Contents of ECUID data table:
   - '0261206846'         (SSECUHN)
   - '1037360170'         (SSECUSN)
   - '4D0907559E  '       (VAG part number)
   - '0002'               (VAG sw number)
   - '4.2L V8/5V      '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'

-> No errors found. File is OK.   *********************
Logged
Rollerton
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 12


« Reply #3 on: April 14, 2019, 11:53:15 AM »

I’ll try it thanks!

I did get the output to sort of work elevated to admin; but the file kept coming up empty/ 2kb size. Obviously I was doing something wrong...
« Last Edit: April 14, 2019, 11:57:21 AM by Rollerton » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)