Pages: [1]
Author Topic: 8N0906018AB 0261207027 xdf needed  (Read 4878 times)
mutzicu
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 66


« on: April 19, 2019, 05:13:16 AM »

Hi,
Can anyone help me with an xdf for Audi TT 1.8T 180HP?
Year: 1999
ECU hw number: 0261207027
ECU sw number: 1037354503
8N0906018AB
I've tried to map my own but couldn't find a matching XDF for my version...
Thanks,
« Last Edit: April 19, 2019, 10:58:44 AM by mutzicu » Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #1 on: April 19, 2019, 08:40:41 AM »

Please obey forum rules.

http://nefariousmotorsports.com/forum/index.php?topic=1081.0title=

http://nefariousmotorsports.com/forum/index.php?topic=5549.0title=
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
mutzicu
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 66


« Reply #2 on: April 19, 2019, 10:05:37 AM »

Hi,
Can anyone help me with an xdf for Audi TT 1.8T 180HP 1999 8N0906018AB ?
I've tried to map my own but couldn't find a matching XDF for my version...
Thanks,

Sorry.. posted in the wrong place. Also I didn't mention engine AJQ and:
ECU hw number: 0261207027
ECU sw number: 1037354503
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: April 19, 2019, 10:22:14 AM »

fix topic and ill move it back.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
mutzicu
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 66


« Reply #4 on: April 19, 2019, 11:00:57 AM »

Sorry, I need some time to adjust with the forum... I think it's ok now?
Logged
mutzicu
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 66


« Reply #5 on: April 20, 2019, 11:01:21 AM »

I started to create my own map using another model of ECU. I managed to find  the LAMFA map, but something seemed weird for me as all maps I've seen until now have values of max 1 in this table, but the one I've found in my bin had some values over 1.9. I said that I'm probably doing something wrong. A few hours later, I found a map that was identical with mine - only the offset was different. I've fixed the offset and now my maps seems to be OK. Can someone take a look on the attached and let me know if indeed matches my bin correctly?
Also, can you tell me what's with the 1.9 values in the LAMFA table?
I started doing this 2 days ago, so please be patience with me Smiley
Logged
mutzicu
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 66


« Reply #6 on: April 21, 2019, 09:50:38 AM »

I've spent all day today and created the xdf for this bin.
I used a very well documented one (...and translated).
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.049 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)