NefMoto > Technical > Tuning > coding out the N249 valve..?
Pages: [1]
« previous next »
Author Topic: coding out the N249 valve..?  (Read 8807 times)
sn00k
Sr. Member
****

Karma: +59/-2
Offline Offline

Posts: 277
« on: February 28, 2012, 07:11:07 AM »
What would need to be changed to be able to remove this one without throwing DTCs?

my german is bad, but im thinking maps concerning "Schubumluftventil-Endstufe" has something to do with this one?
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #1 on: February 28, 2012, 08:46:12 AM »
Quote from: sn00k on February 28, 2012, 07:11:07 AM
What would need to be changed to be able to remove this one without throwing DTCs?

my german is bad, but im thinking maps concerning "Schubumluftventil-Endstufe" has something to do with this one?



What DTC it pulls? (Pxxxx)
Logged
ME7Tuner Wizard
sn00k
Sr. Member
****

Karma: +59/-2
Offline Offline

Posts: 277
« Reply #2 on: February 28, 2012, 10:55:13 AM »
no clue atm.. i was going to turn it off before i removed it.. i will have a look =)

is there a specific way to turn of the codes based on the Pxxxx number? (i have the box fully specified)
Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903
« Reply #3 on: February 28, 2012, 01:02:24 PM »
I found these

But I can look tomorrow as my n249 is unplugged so can get the code

 N80, EVAP deletion... (Alex@unitronic.ca)
05-01-2009 12:13 AM    #4
So here are all the codes i have aquired:
17608 - boost pressure control vavle (N249) mechanical malfunction
P1200 - 35-00 - -
16795 - secondary air injection system incorrect flow detected
P0411 - 35-00 - -
16825 - evap. emission system incorrect purge flow
P0441 - 35-00 - -
17840 - Secondary Air Injection Solenoid Valve (N112): Open Circuit
P1432 - 35-00 - -
17695 - Boost Pressure Control Valve (N249): Open Circuit
P1287 - 35-00 - -
17834 - EVAP Purge Valve (N80): Open Circuit
P1426 - 35-00 - -
Logged
sn00k
Sr. Member
****

Karma: +59/-2
Offline Offline

Posts: 277
« Reply #4 on: February 28, 2012, 01:58:24 PM »
thats great =)

it seems the P1287 and P1200 are the ones im after here.. and also need to find the codeword for the N249 to turn it off like in the pre 2000 cars which doesnt have the N249.
Logged
sn00k
Sr. Member
****

Karma: +59/-2
Offline Offline

Posts: 277
« Reply #5 on: February 28, 2012, 02:09:30 PM »
what can the N249 be named in german? =)

is it this one: "Schubumluftventil-Endstufe"?
Logged
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #6 on: February 28, 2012, 02:44:41 PM »
Quote from: littco on February 28, 2012, 01:02:24 PM
I found these

But I can look tomorrow as my n249 is unplugged so can get the code

 N80, EVAP deletion... (Alex@unitronic.ca)
05-01-2009 12:13 AM    #4
So here are all the codes i have aquired:
17608 - boost pressure control vavle (N249) mechanical malfunction
P1200 - 35-00 - -
16795 - secondary air injection system incorrect flow detected
P0411 - 35-00 - -
16825 - evap. emission system incorrect purge flow
P0441 - 35-00 - -
17840 - Secondary Air Injection Solenoid Valve (N112): Open Circuit
P1432 - 35-00 - -
17695 - Boost Pressure Control Valve (N249): Open Circuit
P1287 - 35-00 - -
17834 - EVAP Purge Valve (N80): Open Circuit
P1426 - 35-00 - -

in my bin file P1200 is between CLALDRA and CLALKVDK
P0411 is between CLASLPE and CLASLV
P1432 - CLASLVE
P1287 - CLAVAR
P1426- CLATEVE
Logged
ME7Tuner Wizard
Giannis
Full Member
***

Karma: +11/-1
Offline Offline

Posts: 176
« Reply #7 on: March 06, 2012, 02:33:48 PM »
i think is CLALDUV: Fehlerklasse: Schubumluftventil-Endstufe try and report
Logged
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565
« Reply #8 on: March 06, 2012, 06:12:04 PM »
Quote from: Giannis on March 06, 2012, 02:33:48 PM
i think is CLALDUV: Fehlerklasse: Schubumluftventil-Endstufe try and report

A couple of options.

1) Change the fault class like mentioned above so if diagnosis of N249 fails it does not throw DTC.
2) Change conditions needed to start diagnosis to unreachable values i.e DLDUVES, TMDLDUV, TMFDUV, TMMZUV
    so diagnosis never starts.

These will help the malfunction DTC but not the open circuit DTC. Thus far I haven't found a way to prevent ECU from checking for open circuit. DTC can be surpressed BUT more than likely interfere with fuel trims adaptation.

Maybe something in DEKON function and ESKONF
« Last Edit: March 07, 2012, 09:08:43 AM by elRey » Logged
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565
« Reply #9 on: March 07, 2012, 11:22:33 AM »
Try changing byte3 of ESKONF from 00 00 00 00 to 00 00 11 00
or from 0 to 12 dec


function DMDSTP defines what errors interfere with fuel adaptation.
« Last Edit: March 07, 2012, 11:32:52 AM by elRey » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 08:48:54 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)