Pages: [1]
Author Topic: Possible locked ecu?  (Read 3191 times)
Integrated_20
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41


« on: April 24, 2019, 01:40:07 PM »

I inserted my oem bin file plus the one I've been trying to flash to my 02 s4. I ran it through me7sum and it passed. then when I try me7check it fails. Tried flashing to my car and no luck. Can someone help me figure out why this is happening. I was told by previous owner that the car might have a apr flash on it but when I read ecu info I didnt see anything
Logged
Maxohio
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 83


« Reply #1 on: April 25, 2019, 11:22:30 AM »

me7check shows me its checksums are ok.
Are you still able to start the engine and connect to your ECU using VCDS for example
If not, i think your ECU is bricked and has to be revived using bootmode.

« Last Edit: April 25, 2019, 11:24:29 AM by Maxohio » Logged
Integrated_20
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41


« Reply #2 on: April 25, 2019, 07:48:53 PM »

No cars fine and still starts up normal. no issues there. I just cant write to the ecu. I can pull the file too no problem. The first time I tried to read ecu info I was able too. Then when I tried yesterday it wouldn't come up..?
Logged
Integrated_20
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 41


« Reply #3 on: April 25, 2019, 07:51:10 PM »

From what I've read here I should be able to flash a mbox onto the current tbox but thats not happening either. That is why I tried downloading the stock bin file and modifying that to go back on the car. Could it be a voltage issue?
Logged
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304



« Reply #4 on: May 03, 2019, 09:33:01 PM »

does it fail when you flash or does it not do anything at all
also make sure you have 400bb memory selected
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.031 seconds with 17 queries. (Pretty URLs adds 0.003s, 0q)