Pages: [1]
Author Topic: Please Help Tune for Audi A4 B5 4B0906018CG  (Read 3111 times)
Hennervw
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 5


« on: April 29, 2019, 08:44:29 AM »

Hey
« Last Edit: April 29, 2019, 08:49:09 AM by Hennervw » Logged
Hennervw
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 5


« Reply #1 on: April 29, 2019, 08:48:26 AM »

Hey guys, I've built an Audi A4 B5 with the 1.8t AWT engine and would like to vote it now. Now I have seen that the ME7.5 is not as easy as I thought and hope now that I can help people here to create a reasonably reasonable setup. I have installed a 76mm exhaust system, 2mm compression reduction plate to get a compression of 8,5-8,9: 1. Then there is a 3 bar fuel pressure regulator, 630cc Simens Deka injectors and a GT3076 turbocharger.
The car should run at 1.5 bar holding pressure and a Lambda ratio of 0.85-0.90. Nachkat probe as well as EGR and secondary air pump should be programmed out. I am the people who can help me and not only chatter ever thankful for your participation. PS: I come from Germany for people who can come from here also write me in German to the grammatical mistakes of translators and long puzzles to spare. Yours sincerely Wink
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #2 on: April 29, 2019, 06:51:02 PM »

have you read any the community file threads?
« Last Edit: April 29, 2019, 06:53:01 PM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Hennervw
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 5


« Reply #3 on: April 30, 2019, 03:39:00 AM »

I've searched all the chiptuning forums but no one posted anything matching so I'm looking for it here
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #4 on: April 30, 2019, 01:52:41 PM »

I've searched all the chiptuning forums but no one posted anything matching so I'm looking for it here

That isn't what I asked
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
macxxx
Sr. Member
****

Karma: +29/-1
Offline Offline

Posts: 498


« Reply #5 on: May 01, 2019, 01:17:36 AM »

it a DIY forum so no one will post a ready to go file and you won't find them here - start from stock file , read the topics etc.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)