Pages: [1]
Author Topic: Searching for torque label  (Read 499 times)
Mansen
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8


« on: May 06, 2019, 04:01:27 AM »

Hi guys,
searching for the right label to see the real torque in Nm.
Just found some labels like:
mifa_w
mifab_w
miist_W

but they show me an area between 0-100%

I need the one in Nm like reading Block 120 in VCDS

Hope you guys can help me.

Greets Mansen
Logged
nyet
Administrator
Hero Member
*****

Karma: +440/-60
Offline Offline

Posts: 10014


WWW
« Reply #1 on: May 06, 2019, 08:08:22 AM »

There is no such thing
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Mansen
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8


« Reply #2 on: May 07, 2019, 12:28:15 AM »

But with VCDS reading block 122 shows it in Nm. Is it a calculated measurand?
Is there a way to calculate it by my self?
Logged
IamwhoIam
Hero Member
*****

Karma: +24/-36
Offline Offline

Posts: 697


« Reply #3 on: May 07, 2019, 04:03:08 AM »

(miist_w - mdverl_w) * MDNORM=your calculated torque value
Logged

I have no logs because I have a boost gauge (makes things easier)
Mansen
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8


« Reply #4 on: May 11, 2019, 05:55:46 AM »

what i have to do for MDNORM? Is it the maximum torque?
I didnĀ“t get any meaningful results...
Logged
nyet
Administrator
Hero Member
*****

Karma: +440/-60
Offline Offline

Posts: 10014


WWW
« Reply #5 on: May 12, 2019, 07:25:46 PM »

It isn't real torque anyway. You're wasting your time, IMO
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0s, 0q)