Pages: [1]
Author Topic: ME7.1.1 crossflash compability  (Read 4146 times)
nkiller
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« on: May 10, 2019, 12:40:19 AM »

Hi to all, yesterday i make a very stupid BIG mistake - after a boot read (and prepairing for write), i drop the boot cable (pin28-29F800) on one of electrolytic capacitors on board, and after that i have no comunication with ecu.
Ecu is 4D1907558 from RS6 C5, after a long search i cant find that type of ecu. I only found a lot of S6 ecus with pn: 4D0907558 which is 7.1.1
My question are CPU internal rom \ PCB  is same in these ecus, and if i reprogram ( flash+ 5P08) ecu will work ?

« Last Edit: May 10, 2019, 12:49:38 AM by nkiller » Logged
Kompiesto
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 109


« Reply #1 on: May 10, 2019, 04:05:05 AM »

If is ST10 Ecu You must flash MCU using correct data
Logged
macxxx
Sr. Member
****

Karma: +30/-1
Offline Offline

Posts: 498


« Reply #2 on: May 10, 2019, 07:57:35 AM »

I guess s6 ecu will have some components missing on pcb ( like for egt , n75 etc )
Logged
nubcake
Sr. Member
****

Karma: +53/-4
Offline Offline

Posts: 400


« Reply #3 on: May 10, 2019, 02:21:03 PM »

S6 lacks one knock sensor input AFAIK, so not directly x-flashable.
Logged
nkiller
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« Reply #4 on: June 11, 2019, 08:17:36 AM »

Problem is fixed with another ecu from Germany - ex ABT tuned ecu, without eprom for good money!   Grin
Logged
SQT
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 57


Respectfully SQT ;)


« Reply #5 on: July 01, 2019, 06:15:27 AM »

Please make more photos in good quality for comparison, for comparison with S4 v8
Logged

a6 2.7
sorry for my English
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 17 queries. (Pretty URLs adds 0s, 0q)