NefMoto > Technical > Tuning > S3 housing to AGU m3.8.3 MAF
Pages: [1]
« previous next »
Author Topic: S3 housing to AGU m3.8.3 MAF  (Read 3540 times)
remembera
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« on: May 15, 2019, 02:45:54 AM »
Hi all, I will run s3 husing in 1.8T maf. From that Ive read in this forum the common way is just to copy the MAF voltage values from 1 car to the other. Ive found the s3 voltage MAF map but it has 512 values, mine has only 256. Ill be very thankfull if u hint me how I could make it properly. Also the x axis of S3 map has values of voltage mine has only numbers from 1-255. Im still newbie, so please excuse me if the question is noobie. Thanks in advance.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #1 on: May 15, 2019, 08:58:34 AM »
You'll have to use excel or write a small program to delete every other entry.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826
« Reply #2 on: May 15, 2019, 12:19:29 PM »
Quote from: remembera on May 15, 2019, 02:45:54 AM
Hi all, I will run s3 husing in 1.8T maf. From that Ive read in this forum the common way is just to copy the MAF voltage values from 1 car to the other. Ive found the s3 voltage MAF map but it has 512 values, mine has only 256. Ill be very thankfull if u hint me how I could make it properly. Also the x axis of S3 map has values of voltage mine has only numbers from 1-255. Im still newbie, so please excuse me if the question is noobie. Thanks in advance.

The best bet is use an old 12V VR6 MAF with it proper MLHFM calibration. It has 256 values. You can use a newer MAF Housing but extrapolation is not totally aligned.
Logged
Tezotto01
Full Member
***

Karma: +3/-12
Offline Offline

Posts: 97
« Reply #3 on: May 16, 2019, 04:34:29 AM »
The correct way to do it is to calculate the difference between the areas of the MAF's and to convey that difference to the 256 points using excel
Logged
remembera
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #4 on: May 16, 2019, 03:00:34 PM »
thanks a lot! Seems like the Vr6 housing is the best decision. Anyway Ive just wondering S3 housing and vr6 maf is almost the same diameter. Will it work if i stay with S3 housing but data from VR6? The sensor is AGU's sensor. Thanks in advance
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW
« Reply #5 on: May 16, 2019, 03:04:36 PM »
If you can't find a perfect match, i'd match sensors *first*, then scale by area like Tezotto01 suggested.

You can't make any assumptions about MAFs that use different sensors entirely.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
RS-MAD
Jr. Member
**

Karma: +3/-1
Offline Offline

Posts: 46
« Reply #6 on: May 16, 2019, 05:28:01 PM »
You cant use S3 housing for AGU MAF as they are different mounting position. Use the VR6 one , or some older BMW.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • December 03, 2024, 01:42:38 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)