Gents,

Have an R32 with a N321 Exhaust Flap error that I tried to code out late last night.  Found this:
http://nefariousmotorsports.com/forum/index.php?topic=3899.0

Changing that byte is for XX on Byte 2.  Is it just that it needed to be added to the Wiki?  Also EVAP wasn't being disabled either but that would be Byte 1 TEV?  Didn't seem to work.

Using a CP with ESKONF starting at 10A46.  Weirdly the first row of bit parts are obviously for the injectors - all are marked as skip except for Injector 4.  Whut.

Byte  0: EV6    EV3     EV4     EV1
Byte  1: XX     NWS1    LULK    TEV
Byte  2: XX     EKP     AKF?    XX
Byte  3: XX     XX      XX      SLP
Byte  4: EV5    SLV     XX      NWS2
Byte  5: HSH2   ULT     EV2     LDR
Byte  6: XX     BKV     HSH     XX
Byte  7: XX     XX      XX      XX
Byte  8: ZUE    ZUE     ZUE     ZUE
Byte 10: ZUE    ZUE     ZUE     ZUE
Byte 11: XX     XX      XX      XX
Byte 12: XX     XX      XX      XX

Cheers.

Attached is the ORI.

ESKONF at 10A17? 

Pairs explained as per Wiki?

The bit pairs are different in each file?  So the list on the Wiki means nothing?

You might find this thread useful

http://nefariousmotorsports.com/forum/index.php?topic=14857.0title=