Pages: [1]
Author Topic: EGT Delete Questions  (Read 2537 times)
Dan_G
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: July 23, 2019, 01:36:13 PM »

I just started reading up on tuning a few weeks ago and want to delete my EGTs on stock tune since they are bad and the car will be going stage 3 within 6 months. I have a 2001 Manual S4 and pulled the stock file from the car and used Tunerpro to edit the file. Per the wiki I went into 0x18196 18197, 192CA and changed the values from 01 to 11 which from my understanding would make the ECU skip them. I then put then new file into the Checksum ME7Checker/Fixer and it fixed 2 errors. Is this the correct way to go about this or is my understanding completely wrong. Attached is my stock file as well as what I think is the EGT deleted one if somebody could confirm what I am doing is correct or point me in the right direction.

Thank you,
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.01 seconds with 17 queries. (Pretty URLs adds 0s, 0q)