Pages: [1]
Author Topic: Golf 1.4 16V BCA 036906032G ME 7.5.10 XDF  (Read 1434 times)
nba
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 18


« on: August 08, 2019, 11:12:45 AM »

Hi,
I wrote XDF for BCA engine. Thanks to gremlin for help with EGR switches.

***Update February 2020***
Added:
AGRRMAX
KFDZWOAGR
FKKVS
Rear lambda CD switches


FKKVS is very helpfull if you have higher flow intake. Remember that 1.4 engine hasn't MAF so ECU don't know about airmass so you should adjust it so that STFT and LTFT stabilize as close to zero as possible.
« Last Edit: February 08, 2020, 02:48:19 PM by nba » Logged
BlackT
Hero Member
*****

Karma: +34/-16
Offline Offline

Posts: 702



« Reply #1 on: August 08, 2019, 02:28:07 PM »

Launch control on 1.4 NA engine??
Logged
nba
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 18


« Reply #2 on: August 08, 2019, 02:56:14 PM »

It's usefull in rally car https://www.youtube.com/watch?v=4lpNXHy_MEM
Logged
Marty
Hero Member
*****

Karma: +155/-222
Offline Offline

Posts: 1532


« Reply #3 on: August 08, 2019, 05:38:15 PM »

Upload the original file please
Logged

nba
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 18


« Reply #4 on: August 09, 2019, 12:14:12 AM »

I attached ori bin to 1st post.
Logged
Marty
Hero Member
*****

Karma: +155/-222
Offline Offline

Posts: 1532


« Reply #5 on: August 09, 2019, 08:01:22 AM »

you may want to max out RLVSMXN sense sy_turbo is false   RLVMXN/RLVSMXN are used. RLVMXN is alredy maxed but RLVSMXN is used. i max these out on the na maps i do.
Logged

nba
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 18


« Reply #6 on: August 09, 2019, 02:05:13 PM »

It's too difficult for me, i'm begginer. I think about VNMX, NMAX, NMAXOG method like in S4 wiki.
Logged
nba
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 18


« Reply #7 on: September 18, 2019, 02:52:50 PM »

Added new scalars and tables in 1st post.
« Last Edit: October 01, 2019, 10:47:07 AM by nba » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)