Pages: [1]
Author Topic: ECU Bricked. Suggestions welcome.  (Read 3106 times)
csosnowski
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 26


« on: March 11, 2012, 05:55:48 PM »

I have a bricked 2001 allroad ecu (communication error during flash then software wouldnt recognize cable) and can not get nef to connect to it with the pads shorted or pin 24 shorted. any suggestions please?

I do not have the ability to bench flash it right now, im low on money and cant justify ANY purchase with my wife.

is there a way to 'fool' galletto's software into using the regular blue cable?

im going to have to remove my s4's ecu and swap it in to the allroad so it can be driven, its my wifes moms only car.

please someone help me.
Logged
csosnowski
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 26


« Reply #1 on: March 11, 2012, 07:15:14 PM »

UPDATE: Removed power for 30+ mins and was able to flash a new file on. Car runs now. Thanks for making a good tool Tony.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)