Pages: [1]
Author Topic: Logging VVT position on 1.8t  (Read 3952 times)
ivaylopavlov
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: August 26, 2019, 11:52:49 PM »

Hello,

I'm trying to tune the VVT on 1.8t BFB but i am not able to log what exactly is happening with the chain tensioner.
Does someone know which addresses to include in the ME7Logger? Is there a DC output controlling the solenoid or it's not working like this?

I will be thankful for sharing some experience.

BR
Ivo
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #1 on: August 27, 2019, 02:56:16 PM »

wnwi_w should be the droid you're looking for.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #2 on: August 27, 2019, 03:14:50 PM »

Or with VCDS group 93. in advanced position it should be around 17-30 degree crankshaft
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)