NefMoto > Technical > Tuning > Replace 317cc with 386cc
Pages: [1]
« previous next »
Author Topic: Replace 317cc with 386cc  (Read 3914 times)
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227
« on: September 20, 2019, 10:05:22 AM »
Hi,

I would like to change my 317cc injectors with the 386cc. Where can I find tutorial which maps need to be changed?

Thanks
Logged
ZakDodge
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 42
« Reply #1 on: September 20, 2019, 10:39:44 AM »
Krkte and tvub need to be changed


Sent from my iPhone using Tapatalk
Logged
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227
« Reply #2 on: September 20, 2019, 11:46:21 AM »
Quote from: ZakDodge on September 20, 2019, 10:39:44 AM
Krkte and tvub need to be changed


Sent from my iPhone using Tapatalk

Can I copy the values from bin which is made with 386cc injectors? for example 1ML906032A
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #3 on: September 20, 2019, 12:09:09 PM »
Quote from: totti on September 20, 2019, 11:46:21 AM
Can I copy the values from bin which is made with 386cc injectors? for example 1ML906032A

Yes, this should work but you should sanity check the values.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227
« Reply #4 on: September 20, 2019, 02:14:38 PM »
Quote from: nyet on September 20, 2019, 12:09:09 PM
Yes, this should work but you should sanity check the values.

Thanks. I've just compared 2 bins. 1ML906032A_0001_ori and 8N0906018H _0004_ori
The TVUB and KRKTE values are not same. Which one should I use?
Logged
AntonR
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4

Octavia 2008 1.8t AUM
« Reply #5 on: September 21, 2019, 08:47:18 AM »
+kvb, fkkvs
you can take it from 8N0906018K
Logged
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227
« Reply #6 on: September 27, 2019, 02:19:03 AM »
Quote from: AntonR on September 21, 2019, 08:47:18 AM
+kvb, fkkvs
you can take it from 8N0906018K

So I should copy kvb, fkkvs, tvub, krkte from 8N0906018H. Should I copy the whole table, or just the values? For example the fkkvs RPM parameters are different.
Logged
gt-innovation
Sr. Member
****

Karma: +60/-91
Offline Offline

Posts: 449
« Reply #7 on: September 27, 2019, 05:18:42 AM »
You don`t need to copy fkkvs but you need to double check the trims and adjust fkkvs accordingly...even if you copy fkkvs it will be slightly off.

When you copy tvub be sure that you get the axis as well since sometimes it is a bit different.
« Last Edit: September 29, 2019, 05:50:25 AM by gt-innovation » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 10:40:58 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)