Pages: [1]
Author Topic: Polo GTI 9n3 06A906032TL XDF for SparkCut / Ignition cut  (Read 3232 times)
armaan
Full Member
***

Karma: +6/-15
Offline Offline

Posts: 97



« on: October 13, 2019, 01:05:31 PM »

Hi all, Smiley

Here is an XDF I made for the Polo GTI 9n3 032TL ecu,
The following tables are defined:
-KFTSRL*
-KFSZT*
-FTOMN

*Has some side tables for changing axis values

Intended to be used for implementing a ignition cut or spark cut tune.
The minimum step is at 5950 - 6000

If you guys see anything wrong with the file please do let me know will correct it.
But so far it has worked for me.

Thanks

Logged

It is indeed a difference of perception that brings about our and others reality.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)