Quick question KFZW axis

Pages: [1]

« previous next »

Author

Topic: Quick question KFZW axis (Read 4582 times)

littco

Hero Member

Karma: +52/-7
Offline

Offline

Posts: 903

	Quick question KFZW axis « on: March 16, 2012, 10:39:05 AM »

As above really, just want to check as I know one axis is RPM but the other is %, whats that in relation to? ie whats the % of


« Last Edit: March 16, 2012, 10:47:51 AM by littco »	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: Quick question KFZW axis « Reply #1 on: March 16, 2012, 11:18:35 AM »

Load


	Logged

littco

Hero Member

Karma: +52/-7
Offline

Offline

Posts: 903

	Re: Quick question KFZW axis « Reply #2 on: March 16, 2012, 11:40:07 AM »

Excellent it what I thought.

Next question is I have a remap the % load axis on the kfzw is stock while the kfmirl is increased quite a bit with a max ldrxn and kfmirl value well above this % load on the axis ( max value on axis is 185 whilst highest ldrxn/kfmirl is over 200. Will this mean the timing at values above the max load axis just follow the highest axis and is this a bad ?


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: Quick question KFZW axis « Reply #3 on: March 17, 2012, 10:24:55 PM »

Yes, timing will follow the last column when load meets or exceeds the highest axis value.

It isn't necessarily a problem depending on how much the difference is. Ignition angle must move towards late with increasing load, so if you are having problems with KR when actual load exceeds your axis then you may have to rescale it.

I can't tell you off the top of my head if this axis is shared with anything else.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 07:30:14 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search