my file for the above again, just a start far from complete, for the following bin

-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4016.32//24E/Dst01o/181001//
-> Contents of ECUID data table:
   - '0261207854'         (SSECUHN)         
   - '1037363386'         (SSECUSN)         
   - '8E0909518P  '       (VAG part number)
   - '0001'               (VAG sw number)   
   - '1.8L R4/5VT    '    (engine id)       
-> Contents of ECUID data table:
   - 'HW_MAN004'                           

No. Thats from and 05 right?

All 02 518 binarys are VERY similiar to eachother(many maps are located at the exact same address even, 518, 518M, 518F, 518P), but they differ to the 03-05 binarys. Different boot loader also, flashing an ECU with a bin with the wrong boot loader will brick the ECU.

There are maps at 0x11B0F and 0x11ACF that are used depending on a decision in code.

Their axis are at 0x10153 and 0x1008E(RPM)


There is a table at 0x11B4F, its axis are at 0x10153 and 0x1008E(RPM)

Just to clarify, I only searched code, I did not check the ID of any tables.

TMNSMN  = ?
TANSMN  = ?