Pages: [1]
Author Topic: 750cc bosch ev14 upgrade  (Read 3687 times)
Maddog82
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 39



« on: November 17, 2019, 03:08:45 PM »

good evening all.
I would like to know if anyone could help me, please?

running me7.5, I have upgraded from stock to bosch 750cc ev14 injectors and a Garrett gt2860rs.
would anyone be able to direct me in how to make adjustments to give myself a base map?

thanks to all who can help, regards luke.
Logged

I'm all about development.
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #1 on: November 17, 2019, 03:54:27 PM »

Might actually want to read stickies.

http://nefariousmotorsports.com/forum/index.php?board=2.0
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Maddog82
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 39



« Reply #2 on: November 17, 2019, 04:06:44 PM »

thanks for the link, i've actually been trawling through these, but with no definitive knowledge of where to start i find it a little confusing on where to start and what with,
i think i need to alter
KRKTE
KFLBTS
TVUB
but im not sure by how much i need to alter these, or if i need to alter anything else.

regards luke
Logged

I'm all about development.
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #3 on: November 17, 2019, 04:19:37 PM »

KRKTE and TVUB, KRKTE is a constant calculated using a formula given in the FR and your injectors specs and fuel supply system, same with TVUB you copy these from injector specs and you check your trims and adjust as necessary.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #4 on: November 17, 2019, 04:23:24 PM »

good evening all.
I would like to know if anyone could help me, please?

running me7.5, I have upgraded from stock to bosch 750cc ev14 injectors and a Garrett gt2860rs.
would anyone be able to direct me in how to make adjustments to give myself a base map?

thanks to all who can help, regards luke.

before you fit the turbo get the fuel injectors dialed in. a thread on this forum http://nefariousmotorsports.com/forum/index.php?action=;topic=320.0 has the dead times for your injectors. put those values in your current tune and adjust injection quantity until your fuel trims look good. then fit the turbo and tune that knowing you have fueling right to start with
Logged

Giving your mom a tuneup
Maddog82
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 39



« Reply #5 on: November 17, 2019, 04:35:35 PM »

thank you gents, so the next question is how do I know which PSID I use?
Logged

I'm all about development.
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #6 on: November 17, 2019, 04:44:05 PM »

thank you gents, so the next question is how do I know which PSID I use?

Pretty sure your fuel pressure is the first thing you should know before doing anything, including selecting fuel injectors.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Maddog82
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 39



« Reply #7 on: November 17, 2019, 04:49:04 PM »

at the moment fuel pressure is standard pump, standard regulator, i want to ensure i get a base map so it runs ok before i put another pump and reg on,
being as im learning i want to do small amounts at a time so i dont mess things up too much if i go wrong.

Logged

I'm all about development.
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)