Pages: 1 2 [3]
Author Topic: McMessLoggerEvo - realtime ram display and editor, more to come  (Read 4814 times)
fluke9
Full Member
***

Karma: +24/-1
Offline Offline

Posts: 113


« Reply #30 on: December 04, 2019, 12:52:24 PM »

EDIT: Not even a crash, plain no-start, the command prompt window flashes for a split sec and that is it...

no support below win10 until i find time to relink to an older windows sdk,
sorry but my focus currently is on getting more stuff implemented first.
Logged
prj
Hero Member
*****

Karma: +349/-74
Offline Offline

Posts: 3911


« Reply #31 on: December 04, 2019, 03:09:24 PM »

CCP should be supported by all ecus after (maybe including ME9) but i did not look into the details yet.
Expect bumped up security and atleast a seed-key implementation or even more.
"More". Hardware is involved.
$22 and $23 are your tools on UDS, and they are very fast.
Logged
gt-innovation
Sr. Member
****

Karma: +49/-47
Offline Offline

Posts: 393


« Reply #32 on: December 04, 2019, 03:11:14 PM »

I have found McMess in ME9 too,
but so far not in MED17 EDC17 and newer ones...

CCP should be supported by all ecus after (maybe including ME9) but i did not look into the details yet.
Expect bumped up security and atleast a seed-key implementation or even more.


I can help on ccp just drop me a message when you need... there is no med17 with mcmess btw... ccp/xcp is what newer ecus are using and you have flash capabilities as well and you can also change things in a certain ram area that ccp/xcp allocates...
Logged
q_dubz
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 152



« Reply #33 on: February 24, 2020, 10:25:47 PM »

The long read for people like me who have no clue about this stuff:

https://www.mikrocontroller.net/attachment/115911/mcmess_protocol.txt
Logged
xero
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #34 on: March 10, 2020, 08:01:59 PM »

Someone mentioned that they'd like to see this tested on a diesel ECU - I just happen to have an EDC16U31, of which the matching DAMOS is plastered with McMess information... but no dice. I tried both low and high speed. The log says:

starting connection on <insert your port here> with protocol McMess {LOW|HIGH}SPEED
doing {high|low}speed McMess init...
received response from ECU: 00 00 00 00 00 (5 bytes)
received unknown answer ...
serial port is closed now.

I'd love to contribute to your project!
Logged
jochen_145
Full Member
***

Karma: +8/-3
Offline Offline

Posts: 148


« Reply #35 on: May 19, 2020, 03:17:09 AM »

Can do all that later, my code is portable enough, currently its a all still a rough WIP,
but i am so pleased with how it turns out that i wanted to share ;-)

Are there still investigations to run McMessLoggerEvo on WIN7 Systems ?

Meentime I tryed to run McMessLogger in a Win10 based tablet, but I still connot run, becaus of missing MSVCP140.dll missing Sad

BR Jochen
Logged
FritzP
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #36 on: June 03, 2020, 09:32:46 PM »

I am glad i did not listen as everbody told me McMess is just a braindead protocol of no use...
Actually its fucking useful and with 1kb/s read capabilities not the slowest one ;-)

So please take a quick look at this:
https://www.youtube.com/watch?v=QTydB5fx6wo&feature=youtu.be

and that:


Please try it yourself here and tell me if it works for you:
https://drive.google.com/open?id=19PmsdsiBaBKSwHI0UzimwuDXrD6xViUg

A lot more is to come:
a.) some nifty tools like the live ram view you have seen
b.) a logger which takes damos files for definitions and maybe other formats (ME7Logger?)
c.) a dashboard gui




Very interesting, and very good work.
Will this only work on ME 7 ecu, or can it also work on older motronic ecu with 80515 processor.
Logged
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)