Current for ICM modules on older engines

Pages: [1]

« previous next »

Author

Topic: Current for ICM modules on older engines (Read 2556 times)

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Current for ICM modules on older engines « on: December 04, 2019, 11:19:12 AM »

Tomorow I will make little ECU for controling ignition on audi B4 2.6. It uses standard ICM module like AEB and rest of VW cars.
Some years ago I mesured voltage on ICM input with osciloscope, and it didnt go right away on 5 V, it take some tome to raise. I will post picture later it will be more clear what I talk about.
But does anybody know what is resistor betwen ICM model and driver in MCU?


	Logged

BlackT

Hero Member

Karma: +79/-40
Offline

Offline

Posts: 1425

	Re: Current for ICM modules on older engines « Reply #1 on: December 05, 2019, 07:39:17 AM »

The resistor from ECU to ICM is about 20 ohms, i put on my electronic 22 ohms and it is workinh like original.

I put rev limiter to cut spark at set RPM, it cut spark and it is working, but there is no bang and flames like on 1.8T or 2.7biT
Is this beacuse of timing, or that this engine is 2 Valves per cilinder and 2.7 is 5V, or for that it doesne't have turbo on it? Or all this things together?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 02:31:13 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search