Hi all im very new to all this mapping and kinda scared i dont want to kill the ecu if i do something worng so what do i need to do any help would be great here is what im trying to achaive

Fit the Audi 4.2 Petrol BFM Engine and The 6 speed tiptronic gearbox from a 2004/5 Audi A8

i would like to remove as much as possible of the wiring

Items i want to keep from the Audi are the following

Instrument Cluster
Gearbox
Engine
Paddle shift

what i want to know is how to remove the bcu/bcm and maximum amount of wires

Here is a Few Photos of the Build/Dismantle
Can also follow my build on Instagram @ Benditohuntlea

Thnaks In Advance Bendito

Thnaks for the reply what do you mean by the box immo >? gearbox ?

OH ok and how do i find out what generation my ecu is numbers ?

mine is on a 2004/05 plate i get some photos of the ecu its self if this will help with knowing if it has immo ??

the tcu i been reading online some say its under the carpet drive side uk ? some say under wipers and some say in the gearbox oil pan can anyone tell me where it is located !

thanks !