Pages: [1]
Author Topic: 5mt to 6mt transmission swap, NVQUOT config  (Read 3690 times)
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 269



« on: December 11, 2019, 10:37:31 AM »

Hello all,

I am getting ready to swap a 6 speed manual transmission into my B5 A4 which is currently a 5 speed manual. NVQUOT for all gang 6 are 0. In order for the calibration to be happy, do I just need to populate those fields correctly or do I also have to adjust IGESGA? The other gear ratios and final drive are all different as well.

That being said, can someone tell me where NVQUOT starts in the attached binary? This is the vehicle that the new transmission is from (2002 Audi A4 3.0L 6MT).

Thank you all,
Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 657


« Reply #1 on: December 11, 2019, 01:23:38 PM »

Below is full NVQUOT list for 363327 software.
Logged
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 269



« Reply #2 on: December 11, 2019, 01:29:29 PM »

Below is full NVQUOT list for 363327 software.


Thank you!! Damn, looks like there were lots of transmission options with that ECU. Auto, manual, FWD, AWD and maybe more? Just guessing. I'm assuming that's why there are so many.
Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 657


« Reply #3 on: December 11, 2019, 03:09:10 PM »

Damn, looks like there were lots of transmission options with that ECU.

Universal ECU setting by coding.
Prepared for MT5, MT6, AT5 and CVT in A4/A6 and Cabrio
See possible coding list for this ECU

Logged
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 269



« Reply #4 on: December 11, 2019, 05:02:54 PM »

Universal ECU setting by coding.
Prepared for MT5, MT6, AT5 and CVT in A4/A6 and Cabrio
See possible coding list for this ECU



Thank you again! Double applaud.

Do you happen to know which coding set is the coding for 6MT (my bad if you actually had them in order).
Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1656


« Reply #5 on: December 11, 2019, 06:18:02 PM »

Thank you again! Double applaud.

Do you happen to know which coding set is the coding for 6MT (my bad if you actually had them in order).


anything xxx1x is 6spd manual.
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 657


« Reply #6 on: December 12, 2019, 10:47:07 AM »

Do you happen to know which coding set is the coding for 6MT

According NVQUOT summary picture 6MT data are present in (2,3) or (4,5) columns.
IMHO some difference depends on the difference in gear ratios of transmissions used in A4/A6




   
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 16 queries. (Pretty URLs adds 0s, 0q)