Pages: [1]
Author Topic: Skoda Octavia RS mk1 stage 1  (Read 10078 times)
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227


« on: December 14, 2019, 02:33:54 PM »

Hi,

My modified car has the following parameters:
212,7 PS and 335 Nm
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM


« Reply #1 on: December 14, 2019, 02:45:47 PM »

PID calibrated poorly
Ignition could be more agressive
Logged
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227


« Reply #2 on: December 14, 2019, 03:15:08 PM »

PID calibrated poorly
Ignition could be more agressive

Yes the pid is solved after the dyno. I tried the ignition but with more agressive it was always retard
Logged
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227


« Reply #3 on: December 14, 2019, 03:17:59 PM »

Yes the pid is solved after the dyno. I tried the ignition but with more agressive it was always retard

That is my last log with modified pid
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM


« Reply #4 on: December 14, 2019, 03:25:16 PM »

thats looking good
retards indicates youre running full available timing so no worry about (in reasonable values)
Logged
IamwhoIam
Hero Member
*****

Karma: +43/-99
Offline Offline

Posts: 1030


« Reply #5 on: December 15, 2019, 08:26:16 AM »

386cc injectors is not what most people call a "stage1" type of car anymore
Logged

I have no logs because I have a boost gauge (makes things easier)
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227


« Reply #6 on: December 15, 2019, 08:48:34 AM »

386cc injectors is not what most people call a "stage1" type of car anymore

the original 317cc runs at near 100%, so I changed it to the 386cc. It is plug&play and just some map modifications needed. It is stock at apx and bam engines.
Logged
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227


« Reply #7 on: December 23, 2019, 08:45:03 AM »

Hi,

I've checked the intercooler data. It says 1050cfm @ 0.5 psi drop. It this means that it drops 0,5bar during spool?

Thanks
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« Reply #8 on: December 24, 2019, 12:50:50 AM »

just mount a pressure gauge before and one after the intercooler.
intercooler looks okay and big enought for small k03 turbo
Logged
totti
Full Member
***

Karma: +15/-29
Offline Offline

Posts: 227


« Reply #9 on: December 24, 2019, 03:51:41 AM »

just mount a pressure gauge before and one after the intercooler.
intercooler looks okay and big enought for small k03 turbo

Yes this is the plan. We measured other k03s cars and these cars can reach 1,3bar at 2600rpm. My car can do it only at 3000rmp. I think the ic drops a lot.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 18 queries. (Pretty URLs adds 0s, 0q)