Pages: [1] 2
Author Topic: Tuner Pro XDF for VAG VDO Clusters VWK501HM & VWK503HM  (Read 22500 times)
sda2
Full Member
***

Karma: +19/-0
Offline Offline

Posts: 68


« on: December 22, 2019, 08:28:30 AM »

Hi NefMoto,

To make life a bit easier for me when playing with instrument clusters and different dumps, scales, vehicles, I created two XDF files for Tuner Pro.

Everything I know so far about these clusters is defined, but feel free to add additional items.





Credits belong to the creators of those functions, I only gathered available information and pout it together in one file.

Thanks to tjwasiak for the list of used versions:

VWK501
- 1Jx 920 xx6
- 1Jx 920 xx7
- 3B0 920 xx5
- 3B0 920 xx6
- 3B0 920 xx7

VWK503
- 1J0 920 x46G
- 1J0 920 x46GX
- 3B0 920 xx9
- 3U0 920 xx1
- 3U0 920 xx2


Changelog:

v0.1 22-12-2019
- Initial release

v0.2 03-01-2020
- added softcoding area (options, country, service intervals, distance impulse number)
- added immobilizer key
- added speedometer checksum location (useful for VWK503HM)
« Last Edit: January 03, 2020, 01:21:28 PM by sda2 » Logged
sda2
Full Member
***

Karma: +19/-0
Offline Offline

Posts: 68


« Reply #1 on: January 03, 2020, 05:15:18 AM »

Updated to v0.2

If anyone knows how the checksum for the speedometer scale and axis is calculated, please let me know. For now I only added it to the XDF when copying over a scale from another cluster.

This can be quite useful for VWK503HM users that want to alter their speedometer without getting "dEF." error because 503 clusters are not autocorrecting the checksum.
Logged
Pynoxim
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 45


« Reply #2 on: January 10, 2020, 09:19:35 AM »

You're a hero.

I was busy with this as well but it seems you beat me to the punch.
Logged
mudgle
Newbie
*

Karma: +1/-1
Offline Offline

Posts: 8


« Reply #3 on: April 11, 2020, 01:11:15 PM »

Added led sweep mod for 503. USE ONLY LED SWEEP SINCE IT CONTAINS NEEDLE SWEEP TOO
Logged
Faiber
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #4 on: July 24, 2020, 12:06:44 PM »

I have two small additions to this project. 0x21d to 0C will disable g266 oil level and temp sensor. Original value i had was 3B. 0x217 with value 2F will enable outside air temp sensor g17. Value 2B disables it. These with software version 503. With 501 software g17 sensor is 0X1E5. 503 addresses tested with 3B0 920 829 A
Logged
stuydub
Full Member
***

Karma: +24/-12
Offline Offline

Posts: 227


« Reply #5 on: July 30, 2020, 02:00:26 AM »

LED sweep on a 503 cluster should be used at a risk as it is buggy and contains NO FACTORY DATA in patch...and it was never made public by the author or developer...
Logged
pdodo15
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #6 on: October 26, 2020, 01:33:31 AM »

Hello, anyone knows how to activate the current gear display in D & S mode for VWK501HM?
Thank you!
Logged
stuydub
Full Member
***

Karma: +24/-12
Offline Offline

Posts: 227


« Reply #7 on: October 31, 2020, 05:35:33 AM »

On autos its normally in the bottom part of FIS screen if not use vcds and recode 19 can gateway dont change coding just hit do it and it should appear
Logged
pdodo15
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #8 on: November 02, 2020, 12:52:41 AM »

I will try today. I have the "PRNDS" in the bottom part of FIS, but no current gear display in D or S mode, only when i switch to manual.
I saw that all MK4 R32 have that gear display activated.
My car is a MK4 Golf GTI 1.8T with DSG swap from MK6 Golf R20, maybe that's the problem, the TCU doesn't send that info to cluster.
Thank you for your answer!
Logged
maj0nez
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #9 on: November 17, 2020, 01:36:48 PM »

I will try today. I have the "PRNDS" in the bottom part of FIS, but no current gear display in D or S mode, only when i switch to manual.
I saw that all MK4 R32 have that gear display activated.
My car is a MK4 Golf GTI 1.8T with DSG swap from MK6 Golf R20, maybe that's the problem, the TCU doesn't send that info to cluster.
Thank you for your answer!
Hello I have too 1.8T with DSG DQ250 and used cluster from R32 then display gear.
https://youtu.be/yJiEkiC1Pig
I have bin file from this cluster R32.
Logged
blairdude
Jr. Member
**

Karma: +4/-0
Offline Offline

Posts: 31


« Reply #10 on: April 02, 2021, 02:06:57 PM »

There is an error in the XDFs for the K-Value Parameter; it doesn't allow you to input a value greater than 150 (and with this set to 150, the speedometer will basically be pegged as soon as you're moving)
Logged
ChrisselSchissel
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #11 on: January 10, 2022, 07:57:14 AM »

Thanks for the great work!

I used it as a starting point and added a few additional parameters to the 501 version
Logged
Anoobis
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #12 on: January 16, 2022, 09:27:58 AM »

I have two small additions to this project. 0x21d to 0C will disable g266 oil level and temp sensor. Original value i had was 3B. 0x217 with value 2F will enable outside air temp sensor g17. Value 2B disables it. These with software version 503. With 501 software g17 sensor is 0X1E5. 503 addresses tested with 3B0 920 829 A

I wish this worked properly for me. I've got a 3B0920847E VDO V08. It removes the G266 DTC from memory but it still beeps at me with the MFA warning active. I'm thinking of buying a oil sensor to make some sort of a emulator from it.

The file below is the original in case anyone wants to look at it.
« Last Edit: January 16, 2022, 12:25:40 PM by Anoobis » Logged
GoAzBox
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 10


« Reply #13 on: February 07, 2022, 05:33:41 AM »

I've also created these some 2 years ago and I've shared them on a facebook group back then. They have been going around ever since. Good to seeits still alive. The only function I'm still uncertain about is the reverse tank scaling to fit a Golf/Passat cluster in a T4. I've attached my most recent updated .XDF's. There's a little present in the 503MH version :-)

I also have some very basic mappacks for other clusters. Golf 5 and 6 are still under construction. Will share them when ready.
« Last Edit: February 07, 2022, 05:35:18 AM by GoAzBox » Logged
GoAzBox
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 10


« Reply #14 on: February 07, 2022, 06:05:53 AM »

I wish this worked properly for me. I've got a 3B0920847E VDO V08. It removes the G266 DTC from memory but it still beeps at me with the MFA warning active. I'm thinking of buying a oil sensor to make some sort of a emulator from it.

The file below is the original in case anyone wants to look at it.

Just set the 4th number is the SW coding to 0 and you're fine. You can do it with VCDS. so for example if it is now 01111, set it to 01101 and you done.
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 2.966 seconds with 17 queries. (Pretty URLs adds 0s, 0q)