Thank you for the quick fix
The rail pressure in mbar has psi instead of hpa as axis description.
Same for the boost pressure actual (mbar).
Yea i had to decide on a "standardized" set of units when comparing lots of different log files and adding conversion axes. I will make a metric setting eventually
The differential pressure from the dpf is 17hpa in the first log value but negative 14 something psi plotted.
I don't know how to fix this. In general all hpa are absolute, and psi is relative. If PSI is the "standard" unit it means differential hpa will always end up weird.
There is also no 2nd variable with (mbar) for the differential pressure dpf.
That's odd. There should be a mbar conversion for it.
Ladedrucksteller Ansteuerung is basically wastegate duty cycle and belongs into the boost submenu.
Easy enough to fix
Dont know if its a cool idea to turn the submenus/categories on and off for vcds logs via an option?
Doable but now you've given me a half a dozen things to fix and i have a few other severe bugs i need to fix first
