Pages: [1]
Author Topic: All 4 Injectors throwing codes?  (Read 2493 times)
Swakefield
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 39


« on: December 23, 2019, 10:08:34 PM »

Hey all!

Bit of a strange issue. On my b6 A4 1.8t (running a 518ak file), I ran an auto scan the other day just because it's been a while and I came up with some injector codes? The cars been running completely fine so I'm not too concerned but I figured I'd see if it related to my tune.

The injectors arent stock, but they're OEM for the AWW mk4 Jetta. Got them for free and they're 319cc vs my 282cc stock injectors. And have over 100k less miles so I swapped them out.

 In my tune I simply checked my buddies stock tune (he happens to also have an AWW mk4 with the same injectors), and copied the values from TVUB and KRKTE. Could that be why I'm getting this code? I've been driving for probably 6+ months since doing this with zero problems.

Thanks for any insight into this! Picture attached.

P.s. sorry I was in a rush so I simply took a picture of my laptop instead of screenshot.
In case the "screenshot" is crap:

17645 - Fuel Injector for Cylinder 1 (N30) Open Circuit
P1237 - 004 - No Signal/Communication - Intermittent

P.s.s. I had a compustart remote starter installed a few weeks ago. Could the start up process for it be causing the problem? I'd find that strange.

Sent from my SM-N975U using Tapatalk

Logged

2002 Audi A4 B6 Avant 1.8t 5 Speed Quattro - Upgraded DV, Full Catless Exhaust, Chinese K04-015, Silicone TIP, Coilover Suspension, 630CC Bosch Injectors, Coolerworx Shifter Assembly
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #1 on: December 23, 2019, 10:49:57 PM »

Definitely not related to tune. Hardware/electrical problem.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #2 on: December 24, 2019, 02:51:27 AM »

Have you ever done an oil change and pulled the injectors to let it build pressure first?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 16 queries. (Pretty URLs adds 0s, 0q)