Pages: [1]
Author Topic: 1.8t GT(X)28 and Fuel  (Read 3142 times)
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601


« on: December 29, 2019, 11:53:47 AM »

Hi,

as you may know garrett gt28 size turbo with fast spool behaviour will reach 2bar within a small rpm range.
Its like someone is kicking you in the back.

fkkvs is all 1's but i did make changed in the are without noticeable change.
what is your experience with oem fuel rail and oem fuel pressure regulator?
do i need dash fuel rail and bigger/faster fuel pressure regulator?

regards
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #1 on: December 29, 2019, 11:56:45 AM »

Injectors correct?  Lots of oscillation
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601


« Reply #2 on: December 29, 2019, 12:15:14 PM »

good point

630bosch in the car but values from dekas in the file

but this will not have such a big impact on the spoolup problem?!
Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #3 on: December 29, 2019, 01:22:50 PM »

Can you out whole log?
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601


« Reply #4 on: December 30, 2019, 08:32:42 AM »

 Wink
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #5 on: December 30, 2019, 08:43:16 AM »

Your accel enrichment is tuned totally wrong.
Look at the ESUK module, the answer is there.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601


« Reply #6 on: December 30, 2019, 10:15:15 AM »

not the answer is was waiting for hehe

i never ever saw something changed in ESUK in other files but i havent looked in many "stage3" files with bigger turbos

i thought this is more like a hardware limitation with oem fuelrail and regulator and hoped for confirmation here  Roll Eyes

will dive in the FR now
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)