Hi, folks!  
I started defining BBKHZ section and found that I have two very similar maps, when in other defined maps there's only one. Please open my attached bin and check these addresses: 1D5B6 & 1D610. They look like KFWNWWKA map, but I don;t understand why there are two maps instead of one??

And also, maybe you could check if my defined maps are correct in BBKHZ section:
IMLKHTMS @ 15C55
ZKLAMKH @ 15C5E
BTRKHTMS @ 1954C
CWKHZ @ 19554
DTKATMN @ 19555
DTKH @ 19556
DTMABKH @ 19557
FKHABMN @ 19558
FNSKHLL @ 1955F
MLKHMX @ 19564
NLLAD @ 19565
NLLKT @ 19566
TKATMN @ 19567
TKATW @ 19568
TKHABB @ 19569
TKHLLAB @ 1956A
TMSLOF @ 1956B
ZKHABB @ 1956C
KFNFSKHM @ 1D54A
KFNLLKHM @ 1D57C
KFWNWWKA 1? @ 1D56B
KFWNWWKA 2? @ 1D610
KFWNWWKE @ 1D66A
KIMLATMNL @ 1D6B8

I feel that there are more maps in my bin in 1DXXX zone. Please help me to find missing ones... Atleast in one of the funktionsrahmen (I believe it is ME7.3.1) are shown also these maps: FKHMD; FTMLAKH; FKHLA; FHOKH; DNKH; TKHLLMX; MLSUS; TKHLL; TKHFSAB; TKHMX

Thank you!

BTW: At the moment I've set up my maps so (to disable cat heating):
IMLKHTMS >> FFs
ZKLAMKH >> 00
DTKATMN >> 00
DTKH >> 00
FKHABMN >> 00
MLKHMX >> 00
NLLKT >> 00
TKATMN >> 00
TKATW >> 00
TKHABB >> 00
TKHLLAB >> 00
TMSLOF >> FF
ZKHABB >> 00
NFSKHM >> 50s
NLLKHM >> 50s

can someone confirm FKHABMN location in 06A906032HJ 0002
FKHABMN_0_A -> 1BFFE
FKHABMN_1_A  -> 1BFFF

crap is this something else that belongs in the wiki

Already in there (It has it's own little section below EVAP).

Should be merged.