NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Perfmax_w / rl_w / rlsol_w Me7.1.1
Pages: [1]
« previous next »
Author Topic: Perfmax_w / rl_w / rlsol_w Me7.1.1  (Read 3526 times)
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420
« on: January 13, 2020, 08:14:47 AM »
Question on MAX-Load vs Engine Load vs Engine Load Requested.

From reading the wiki and some other posts about torque monitoring and when either of the two systems intervene i need to keep requested torque above the other two. What i don't understand is what perfmax_w vs rl_w is...

I can target 143 for instance on rlsol_w and perfmax_w is at 86 while rl_w is at 100.

Firstly, is this ok? its hitting target timing and AFR targets... but before i bumped the Engine load requested up it was pulsing like it was hitting a limit then backing itself off through the pull.


Max rl_w ive seen so far is 106
Max perfmax_w ive seen is 90
Max requested is w/e i set it at.

Just making sure if im not doing this right someone pokes me good so i can fix my current thinking process. Thanks in advance!
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #1 on: January 13, 2020, 09:48:42 AM »
I have no idea what perfmax_w is.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420
« Reply #2 on: January 13, 2020, 11:01:54 AM »
Quote from: nyet on January 13, 2020, 09:48:42 AM
I have no idea what perfmax_w is.

Any Chance you can comment on the other portion though. I have KFMIRL which is logging as Requested Engine Load.. its mapping directly to what i put in.

Then on KFMIOP i have it set to 100. do i just need to make sure the KFMIRL is always more?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #3 on: January 13, 2020, 11:35:35 AM »
Quote from: bamofo on January 13, 2020, 11:01:54 AM
Any Chance you can comment on the other portion though. I have KFMIRL which is logging as Requested Engine Load.. its mapping directly to what i put in.

Then on KFMIOP i have it set to 100. do i just need to make sure the KFMIRL is always more?

What do you mean "set to 100"? The output of KFMIOP??
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282
« Reply #4 on: January 13, 2020, 12:12:53 PM »
Perfmax_w is CPU load, has nothing to do with load or req load.
Logged
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420
« Reply #5 on: January 13, 2020, 01:23:59 PM »
Quote from: nyet on January 13, 2020, 11:35:35 AM
What do you mean "set to 100"? The output of KFMIOP??

Yeah the right hand column of it at WOT its 100 now instead of 80's. Torque limiter. is 7.1 not a 3d map?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #6 on: January 13, 2020, 01:40:09 PM »
Quote from: bamofo on January 13, 2020, 01:23:59 PM
Yeah the right hand column of it at WOT its 100 now instead of 80's. Torque limiter. is 7.1 not a 3d map?

So you think the output of IOP is compared with the output of IRL?
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420
« Reply #7 on: January 15, 2020, 01:01:00 PM »
Quote from: Blazius on January 13, 2020, 12:12:53 PM
Perfmax_w is CPU load, has nothing to do with load or req load.

This answered my question.
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282
« Reply #8 on: January 15, 2020, 01:41:13 PM »
Quote from: bamofo on January 15, 2020, 01:01:00 PM
This answered my question.

Okay? Even though I just said that is has nothing to do with your issue / actual question. You need to look at the wiki more.
Logged
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420
« Reply #9 on: January 16, 2020, 07:44:18 AM »
Quote from: Blazius on January 15, 2020, 01:41:13 PM
Okay? Even though I just said that is has nothing to do with your issue / actual question. You need to look at the wiki more.

I did i was more concerened about what that actually was then how the 2-3 mingled with each other. I put the car on the dyno and i figured it out there. Thanks for the help! appreciate it. Car ended up having a bad tiptronic and a stuck open flapper.

Back to the dyno again in a week or so when its been modified and fixed.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 24, 2024, 10:17:40 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 18 queries. (Pretty URLs adds 0s, 0q)