MED17.5 Driving current limit

Pages: [1]

« previous next »

Author

Topic: MED17.5 Driving current limit (Read 3124 times)

AngelPowy

Full Member

Karma: +1/-0
Offline

Offline

Posts: 55

	MED17.5 Driving current limit « on: January 14, 2020, 04:05:26 PM »

Hi, I’m currently planning to buy 4 nostrum injector for my mk6 GTI car. I saw on nostrum website that they provide driving current profile. The first and the second step seem’s ok to adapt. But for the holding phase they ask for 3,5 to 4Amp current and the med17.5 configuration only provide choice between 1.9 to 2.5 amps. So my question is:
- Am I forced to disassemble this ECU to achieve the target current?
- Or is 2.5 amps enough?(I doubt they ask 3.5 to 4 amps for fun)
-Did I misunderstood how the configuration of HDEV works in med 17.5

If anyone have some clue.
Best Regards AngelPowy


	Logged

luigicmd

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: MED17.5 Driving current limit « Reply #1 on: January 17, 2020, 06:37:16 AM »

My friend,
i have same problem and after talk engineering nostrum, this injector not possible install Sad


	Logged

AngelPowy

Full Member

Karma: +1/-0
Offline

Offline

Posts: 55

	Re: MED17.5 Driving current limit « Reply #2 on: January 19, 2020, 11:26:05 AM »

Thank you for your answer. Our only solution is if disassembling this ecu can allow to increase current in holding phase..


	Logged

prj

Hero Member

Karma: +915/-427
Offline

Offline

Posts: 5840

	Re: MED17.5 Driving current limit « Reply #3 on: January 19, 2020, 02:16:41 PM »

Quote from: AngelPowy on January 19, 2020, 11:26:05 AM

Thank you for your answer. Our only solution is if disassembling this ecu can allow to increase current in holding phase..

Hey mr. pro disassembler, have you considered that the injector drivers on the ECU are just not rated for more current? That never occured to you? Tongue


	Logged

PM's will not be answered, so don't even try.
Log your car properly.

IamwhoIam

Hero Member

Karma: +44/-101
Offline

Offline

Posts: 1034

	Re: MED17.5 Driving current limit « Reply #4 on: January 20, 2020, 10:31:57 AM »

LOL


	Logged

I have no logs because I have a boost gauge (makes things easier)

AngelPowy

Full Member

Karma: +1/-0
Offline

Offline

Posts: 55

	Re: MED17.5 Driving current limit « Reply #5 on: January 20, 2020, 10:41:15 AM »

I’m not a pro disassembler and far from this. I was just saying that disassembling may help’to achieve this. And if i’m not mistaken the ecu is giving that much current in phase 2. But phase 2 represent a short time considered as phase 3 I think. So there is any solution if I understand well?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

April 25, 2024, 08:08:19 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search