Pages: 1 [2]
Author Topic: 1.8t m3.8.2 Eeprom reader  (Read 8280 times)
prj
Hero Member
*****

Karma: +905/-420
Offline Offline

Posts: 5790


« Reply #15 on: January 23, 2020, 06:03:23 AM »

Okey. could I then flash my ECU file from m3.8.2, which has already been optimized, onto the m3.8.3 or does it have to be optimized again?
You can transfer the maps.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
horon6155
Jr. Member
**

Karma: +0/-4
Offline Offline

Posts: 41


« Reply #16 on: January 28, 2020, 04:36:02 PM »

the engine is now in my golf 3. it also comes on, but only for two people. immobilizer. i didn't manage to learn my keys with vcds. that's why I decided to code out the immobilizer. I found out that there is a small chip for the lock-out and I have all the things to read out there. only i needed help. at what point is the immobilizer? what do I have to enter? with which program can I compare the checksum?
Logged
horon6155
Jr. Member
**

Karma: +0/-4
Offline Offline

Posts: 41


« Reply #17 on: February 17, 2020, 01:58:40 PM »

I bought me a m3,8,3. How can i Flash my m3,8,2 maps to m3,8,3? Can i Flash a m3,8,2 file  just like it Or am i supposed to override the maps?
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)