Pages: [1]
Author Topic: Check my check sum after use me7sum  (Read 2448 times)
Cupra21
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 5


« on: February 08, 2020, 05:57:56 AM »

Can anyone check my checksum? I would like to make sure it works out well.. Huh Me7check shows that there are no errors
« Last Edit: February 08, 2020, 06:20:51 AM by Cupra21 » Logged
JustGav
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 63


« Reply #1 on: February 08, 2020, 06:46:47 AM »

Can anyone check my checksum? I would like to make sure it works out well.. Huh Me7check shows that there are no errors


Step #1: Reading ROM info ..
 Searching for EPK signature... c:\Users\Manager\Downloads\out.bin: found EPK @0
x10004, sig 0xfffe
OK
 Searching for ECUID table...OK
 EPK         : '41/1/ME7.5/51/4518.05//24B/Dst01o/131201/'
 Part Number : '1ML906032   '
 Engine ID   : '1.8l R4/5VT     '
 SW Version  : '0001'
 HW Number   : '0261207952'
 SW Number   : '1037363579'

Step #9: Looking for rechecks ..
    <1fc6e>  0x01C000-0x01FFFF Chk: 0725698E CalcChk: 0725698E OK (recheck)

*** Found 71 checksums in c:\Users\Manager\Downloads\out.bin

*** DONE! 0/0 error(s) in c:\Users\Manager\Downloads\out.bin corrected in test.b
in! ***


No expert here, but ran okay on the checks.
Logged
Cupra21
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 5


« Reply #2 on: February 08, 2020, 06:51:01 AM »

Step #1: Reading ROM info ..
 Searching for EPK signature... c:\Users\Manager\Downloads\out.bin: found EPK @0
x10004, sig 0xfffe
OK
 Searching for ECUID table...OK
 EPK         : '41/1/ME7.5/51/4518.05//24B/Dst01o/131201/'
 Part Number : '1ML906032   '
 Engine ID   : '1.8l R4/5VT     '
 SW Version  : '0001'
 HW Number   : '0261207952'
 SW Number   : '1037363579'

Step #9: Looking for rechecks ..
    <1fc6e>  0x01C000-0x01FFFF Chk: 0725698E CalcChk: 0725698E OK (recheck)

*** Found 71 checksums in c:\Users\Manager\Downloads\out.bin

*** DONE! 0/0 error(s) in c:\Users\Manager\Downloads\out.bin corrected in test.b
in! ***


No expert here, but ran okay on the checks.

Thanks, so if u and me have good i try this today Grin
Logged
Auriaka
Full Member
***

Karma: +17/-2
Offline Offline

Posts: 113



« Reply #3 on: February 08, 2020, 07:06:24 PM »

OP, if you are using Tunerpro, I have been using MTX electronics me7 plugin for my checksums. It does it everytime I save and it has been working flawlessly for me. No second guessing and no worries. I would highly reccomend it
Logged
Cupra21
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 5


« Reply #4 on: February 08, 2020, 07:55:53 PM »

OP, if you are using Tunerpro, I have been using MTX electronics me7 plugin for my checksums. It does it everytime I save and it has been working flawlessly for me. No second guessing and no worries. I would highly reccomend it


I saw this plugin and i maybe buy it but me7check/sum is faster and Simple  in this time
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)