Pages: [1]
Author Topic: flashing different software versions  (Read 3114 times)
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741


« on: February 12, 2020, 10:38:27 PM »

Just need some confirmation.

Is it possible to go from 4D1907558B to 4D1907558F for example?

Reading Version Strings...
-> Bootrom Version = 06.02
-> EPK = 42/1/ME7.1.1/5/8542.05//25C/Dst01o/160403//
-> Contents of ECUID data table:
   - '0261208051'         (SSECUHN)
   - '1037368087'         (SSECUSN)
   - '4D1907558B  '       (VAG part number)
   - '0002'               (VAG sw number)
   - '4.2l V8/5VT    '    (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'

and flash

Reading Version Strings...
-> Bootrom Version = 06.02
-> EPK = 42/1/ME7.1.1/5/8542.05//25K/Dst01o/250204/
-> Contents of ECUID data table:
   - '0261208728'         (SSECUHN)
   - '1037370934'         (SSECUSN)
   - '4D1907558F  '       (VAG part number)
   - '0001'               (VAG sw number)
   - '4.2l V8/5VT    '    (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'
Logged
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741


« Reply #1 on: February 14, 2020, 12:22:35 AM »

so the flash went fine no errors but the car wont start with the above, so in this example I was not able to go from B - F versions.
Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #2 on: February 14, 2020, 01:05:14 AM »

You must put EEPROM file from that ECU you flashed.
Or try to put virgin EEPROM file
Logged
Detund
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 17


« Reply #3 on: March 30, 2020, 12:39:01 AM »

You should also flash the VIN SKC EEP FROM ONE TO ANOTHER DEVICE

Στάλθηκε από το Redmi Note 6 Pro μου χρησιμοποιώντας Tapatalk

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)