Pages: [1]
Author Topic: Med9.1 1K0907115T 0261S02469 387445 Map-pack *FREE*  (Read 4509 times)
jacktfsi
Jr. Member
**

Karma: +18/-0
Offline Offline

Posts: 44


« on: March 31, 2020, 06:30:09 AM »

Hi all, As a contribution to this great forum i'm attaching a map-pack i've created from scratch for an ed30 golf gti.

The axis's have been doubled checked with IDA pro but please let me know if anythings wrong. The map-pack should have everything you need for 'stage1-3'.

Cheers for the help guys and i hope this helps someone out as it took me weeks to build.


Logged
jacktfsi
Jr. Member
**

Karma: +18/-0
Offline Offline

Posts: 44


« Reply #1 on: April 01, 2020, 11:47:20 AM »

I've updated the map-pack as i found some incorrect addresses...

Here's the update.

Cheers.
Logged
bipbip38
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 4


« Reply #2 on: April 05, 2020, 04:10:27 AM »

Hi, Thank you for your help  Wink

Actually I'm working on it in IDA, I'm in the begining, it requires a lot of patience  Roll Eyes

You have doubled your axis's, that nice, but Did you already identify a function that you will use for the switch ?  Smiley
Logged
jacktfsi
Jr. Member
**

Karma: +18/-0
Offline Offline

Posts: 44


« Reply #3 on: April 05, 2020, 04:38:45 AM »

Hi, Thank you for your help  Wink

Actually I'm working on it in IDA, I'm in the begining, it requires a lot of patience  Roll Eyes

You have doubled your axis's, that nice, but Did you already identify a function that you will use for the switch ?  Smiley

Hi,

Some of the axis are doubled by accident most likely as I usually hide duplicates with winols if that’s what you mean.

IDA is a difficult learning curve especially if your not used to asm.

Cheers
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)