Pages: [1]
Author Topic: ME7.1.1 IMMO Problem  (Read 2291 times)
gergi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: April 04, 2020, 03:01:39 AM »

Hello,

haved troubls with eeprom 95P08 from a ME7.1.1 ECU 4Z7907551N A6 2.7T 250HP manual transmission

i read the eeprom with trashdata to do immo off.
tryed some things and write the eeprom back, now i have a eeprom error, car starts but some light are on and P1640 is stored, motor runs in limp mode..

wrote the ori eeprom back but i have also eeprom error and limpo mode..

now i think in the file are some sections missing, i desolder the eeprom and read it with a programmer, the files look complete different.

dont know what i can do now

can anyone help me do fix this problem?
enclosed my eeprom read with trashdata and my read with programmer (after i wrote the ori back)

thank you!!



Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.175 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)