Hi. I'm swaping 1,8T engine to audi B2 body. 032J (1,8T AMK file will be used) There ir no abs module, speed sensor it's just mechanical cable from gearbox to dash. Running without speed monitoring isnt good idea - years ago in my another car abs module broke down(so no information about speed was given to ECU), engine-braking was very hard, i have faults "lost speed signal", "idle rpm greater that expected". Changing file could solve this problem, which maps are responsible for that? Maybe ECU must have speed signal, so swaping abs module required?If I understand correctly, ME7,5 gets speed signal via CAN from ABS module or instrument cluster(depends on which system: with speed sensor on gearbox, or without it)  Changing gearbox isn't good idea - gearboxes from B3, B4, B5... doesnt fit to body without welding