Pages: [1]
Author Topic: Can someone read me a MLHFM from AEB/AGU or similar?  (Read 2447 times)
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« on: April 15, 2020, 03:29:18 PM »

I only need values from MLHFM (voltage and air flow) for old HFM2 MAF, one that AEB and AGU uses.
Can be excel, code in post , or simply bin and xdf, OLS...
Ofset also
If M3.8 work like ME7?
Thank you

Logged
xsix
Jr. Member
**

Karma: +0/-2
Offline Offline

Posts: 32



« Reply #1 on: April 16, 2020, 02:57:23 AM »

Maybe this help you  Smiley
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #2 on: April 16, 2020, 07:19:15 AM »

I only need values from MLHFM (voltage and air flow) for old HFM2 MAF, one that AEB and AGU uses.
Can be excel, code in post , or simply bin and xdf, OLS...
Ofset also
If M3.8 work like ME7?
Thank you



No it does not work like HFM5.
There is no 5V reference, the signal goes higher than 5V IIRC, and there is no reverse flow measurement.
Don't even try to connect one to a ME7 ecu.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #3 on: April 16, 2020, 10:22:46 AM »

No it does not work like HFM5.
There is no 5V reference, the signal goes higher than 5V IIRC, and there is no reverse flow measurement.
Don't even try to connect one to a ME7 ecu.
I need for some other project to mesure flow with arduino
Yes i know it goes higher than 5V.

Maybe this help you  Smiley
Thank you, this schould help
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)