Pages: [1]
Author Topic: MED9.1 SET BUTTON (multimap)  (Read 7350 times)
leeimad
Newbie
*

Karma: +1/-3
Offline Offline

Posts: 22


« on: May 06, 2020, 07:55:25 AM »

Hello
i'm working on MED9.1 project, i did a map switching with clutch and brake pedals, but i want to remplace
clutch by the SET BUTTON (see images), but i can't identify the variable name of set button on the A2L file.
Could you help me please
Logged
noice
Newbie
*

Karma: +16/-3
Offline Offline

Posts: 23


« Reply #1 on: May 06, 2020, 09:00:19 AM »

The TPMS button is wired to the abs controller, not to the ECU.


Sent from my iPhone using Tapatalk
Logged
leeimad
Newbie
*

Karma: +1/-3
Offline Offline

Posts: 22


« Reply #2 on: May 07, 2020, 09:34:31 AM »

The TPMS button is wired to the abs controller, not to the ECU.


Sent from my iPhone using Tapatalk

Thank you for your reply, but i have seen on youtube a med9.1 switching with tpms how it work?
Logged
d1scussi0n
Jr. Member
**

Karma: +5/-6
Offline Offline

Posts: 34


« Reply #3 on: May 09, 2020, 11:24:38 PM »

Hello
i'm working on MED9.1 project, i did a map switching with clutch and brake pedals, but i want to remplace
clutch by the SET BUTTON (see images), but i can't identify the variable name of set button on the A2L file.
Could you help me please

hello mate, can you help me with map switching for med9? maybe in exchange for als or something? i am no good with disassembly.thanks
Logged
leeimad
Newbie
*

Karma: +1/-3
Offline Offline

Posts: 22


« Reply #4 on: May 14, 2020, 12:51:59 AM »

.....
Logged
john9357
Full Member
***

Karma: +10/-1
Offline Offline

Posts: 54


« Reply #5 on: May 17, 2020, 12:47:50 AM »

maybe the abs send state of TPMS button in the propu can
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #6 on: May 17, 2020, 06:09:40 AM »

maybe the abs send state of TPMS button in the propu can
Either that or someone re-wired the button.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
leeimad
Newbie
*

Karma: +1/-3
Offline Offline

Posts: 22


« Reply #7 on: May 17, 2020, 09:41:51 AM »

thank you for your reponses.
I tried also by the ESP button with B_espss but doesn't switch
Logged
cherry
Full Member
***

Karma: +23/-2
Offline Offline

Posts: 245


« Reply #8 on: May 17, 2020, 10:11:34 AM »

There is also "W" button which was installed in GT 1.4tsi twincharger. I think it was just some torque reducing for winter, but sure i will not say just connect button to MED9.1 and you have that function :-)
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #9 on: May 17, 2020, 11:15:51 AM »

ESP works just fine, if you get the correct variable.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
leeimad
Newbie
*

Karma: +1/-3
Offline Offline

Posts: 22


« Reply #10 on: May 18, 2020, 11:12:22 AM »

ESP works just fine, if you get the correct variable.
Many thanks , I didn't try it but i think that's B_esppas
Logged
leeimad
Newbie
*

Karma: +1/-3
Offline Offline

Posts: 22


« Reply #11 on: May 22, 2020, 08:25:48 AM »

B_esppas also isn't correct
Logged
Daniel_Florida
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 6


« Reply #12 on: May 28, 2020, 05:40:12 AM »

Did you find how?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.169 seconds with 18 queries. (Pretty URLs adds 0s, 0q)