Pages: [1]
Author Topic: Disable rear O2 1.8T AMK engine 360314  (Read 2493 times)
malec
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 16


« on: May 11, 2020, 09:54:35 AM »

Hello!

I have physically removed the KAT and the rear O2 sensor. I've made a few changes but still getting one DTC for Bank1 Sensor2 heating element open circuit. Engine is AMK and soft version is 360314 (8N0906018J)
Below are the changes so far:
1819E CDHSH -> 0
1819F CDHSHE -> 0
181A3 CDKAT -> 0
181AB CDLSH -> 0
181B9 CWKONABG -> 0
181BB CWKONLS -> 1
10BF4 ESKONF -> AA FF 00 F0 FF FB 3C

Any advice what else is needed?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 16 queries. (Pretty URLs adds 0s, 0q)