Pages: [1]
Author Topic: How to control early opening of the 1.8t BFB A4 B7 thermostat  (Read 3065 times)
Kejsi
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 44



I have a question about the coolant temperature in a4 b7 1.8t bfb. As you know, the thermostat is electrically controlled (heater) and unfortunately begins to open only at 100 degrees Celsius, this is too high temperature and when charging 2.2 bar, knocks appear with already low ignition 10 degrees ... When logging at lower temperatures coolant (about 85-90 degrees Celsius) and the same top-up you can get 15 degrees without knocking
« Last Edit: May 15, 2020, 05:10:56 AM by Kejsi » Logged
Kejsi
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 44


« Reply #1 on: May 12, 2020, 02:36:27 PM »

So the question for you is which map is responsible for opening the thermostat earlier? I tried to mount a thermostat with 2.0 tfsi 87 degrees but the motor handle bothers. Adaptation from B5 is too extensive and I would prefer to avoid it
Logged
fknbrkn
Hero Member
*****

Karma: +185/-23
Offline Offline

Posts: 1454


mk4 1.8T AUM


« Reply #2 on: May 13, 2020, 08:52:56 AM »

KMTR section
Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #3 on: May 13, 2020, 11:38:57 AM »

IN bex file is it at 0x1B1A8
conversion factor (X*0.75)-48

Y axis is speed kmh, X axis is rpm
« Last Edit: May 13, 2020, 11:41:28 AM by BlackT » Logged
Kejsi
Jr. Member
**

Karma: +1/-1
Offline Offline

Posts: 44


« Reply #4 on: May 14, 2020, 12:48:39 AM »

And in what address is the moment when the heater starts to turn on? Because in what you provided is the dependence of the thermostat opening support on rpm and speed. But thanks a lot for the info


Logged
BlackT
Hero Member
*****

Karma: +79/-40
Offline Offline

Posts: 1425



« Reply #5 on: May 14, 2020, 02:52:51 AM »

This is desired temperature, not actual termostat opening (BDW. y axis is load) 
You can try to figure out when FAN starts by looking in FR
http://files.s4wiki.com/docs/MED9.1%20TFSI.pdf

 
KMTR section


Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)