Pages: [1]
Author Topic: Benz edc15C6 IROM  (Read 5126 times)
Pyromaniak
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14


« on: May 17, 2020, 02:29:07 AM »

Hi guys, i read IROM from my mercedes ml270cdi... its EDC15C6

I want to dissable checksum in ecu, because i want to put in moates flash emulator (like ols300)

I have my irom changed (my brother work for me) but i CANT WRITE back to c167

Im connected with old kkl cable over kline.

I thinkink about bad settings SYSCON or BUSCON or i need connect directly with Rx Tx and bootstraps pins?

Or i need new c167 with free OTP memory?

Thanks in advance Smiley

Logged
Pyromaniak
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14


« Reply #1 on: May 17, 2020, 02:39:50 AM »

Here is my ori file and video how i read out https://www.youtube.com/watch?v=gwkPdUnDyMU&feature=youtu.be
Logged
daniel2345
Full Member
***

Karma: +11/-7
Offline Offline

Posts: 197


« Reply #2 on: May 17, 2020, 05:54:35 AM »

You can not reprogram the C167 internal rom of any EDC15.

Mostly it is masked rom, partly OTP.

If you put it to another address, because there is free OTP Rom, it will not work since absolut address are used in in bosch EDC15 OS.

Logged
Pyromaniak
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14


« Reply #3 on: May 17, 2020, 11:36:13 PM »

Ok, its possible to change my c167 (i have with mask B59233-not sure how one is it Grin) with internal rom

with one which have inside reprogramable flash?

Its possible? have someone figured out?

I have no problem with change my c167, but i have problem with change my c167 with ewery try  Roll Eyes
Logged
Pyromaniak
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14


« Reply #4 on: June 22, 2020, 11:14:37 PM »

now im fine  Grin Grin Grin

https://youtu.be/cp25zIndZqc
Logged
nihalot
Full Member
***

Karma: +41/-3
Offline Offline

Posts: 117


« Reply #5 on: June 23, 2020, 12:29:35 AM »

done long ago Wink
https://tangentmotorsport.com/

now have auto tool too, check attachments
Logged

www.tangentmotorsport.com

multimap/LC/rolling antilag for MG1/MED17/EDC17/MED9/EDC15

contact for reverse engineering services of any ECU/TCU
Pyromaniak
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14


« Reply #6 on: June 23, 2020, 08:14:31 AM »

Your post teach me  Wink thank you mate
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 18 queries. (Pretty URLs adds 0s, 0q)