NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Scirocco 2.0 TSI CAWB MED17.5 - Getting rid of CAT and doing it properly.
Pages: [1]
« previous next »
Author Topic: Scirocco 2.0 TSI CAWB MED17.5 - Getting rid of CAT and doing it properly.  (Read 2920 times)
h2esk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21
Hello guys!
I'm planning on doing a straight pipe on my car. So I want to turn off CAT related diagnostics in ECU. The S4wiki was a great source of tips and crossreferencing it with FR for MED17.5 lead me to getting almost everything as it should be. But there is one issue, CLRSHK is not defined in the available FR yet it exist in my ECU damos. Crossreferencing it with MED9.1 leads me to just setting bit 0 to "1". But before I do something I would rather ask!

Linking also to file I have now flashed with definitions.
http://nefariousmotorsports.com/forum/index.php?topic=14137.0
Logged
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304
it isn't as simple as disabling cat diag. you'll run into over-boost and lean issues.
Logged
h2esk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21
I'm trying to disable all cat and second lambda probe functions so no fuel trims are made by second probe, what do you mean about lean issues?
EDIT: I'm also getting rid of second probe.
« Last Edit: May 18, 2020, 03:04:28 AM by therape » Logged
dilly
Sr. Member
****

Karma: +12/-36
Offline Offline

Posts: 304
Quote from: therape on May 18, 2020, 03:02:13 AM
I'm trying to disable all cat and second lambda probe functions so no fuel trims are made by second probe, what do you mean about lean issues?
EDIT: I'm also getting rid of second probe.
removing your cat results in overspool and the ecu is not configured for that. if you are just doing a downpipe for sound, there is no point.
either scratch your idea of removing the cat or get a proper tune
Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283
Quote from: therape on May 18, 2020, 03:02:13 AM
I'm trying to disable all cat and second lambda probe functions so no fuel trims are made by second probe, what do you mean about lean issues?
EDIT: I'm also getting rid of second probe.

CAWB only one lambda after the front cat
Logged
h2esk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21
Quote from: dilly on May 18, 2020, 05:57:56 PM
removing your cat results in overspool and the ecu is not configured for that. if you are just doing a downpipe for sound, there is no point.
either scratch your idea of removing the cat or get a proper tune

Or I can do the tune myself? I have only asked about CLRSHK codeword, not about consequences of doing a downpipe.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 11:25:13 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)