Pages: [1]
Author Topic: I can't read the file from the ECU  (Read 6421 times)
Garbus19
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 14


« on: May 27, 2020, 11:58:48 AM »

I can't read the file from the ECU
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2796



« Reply #1 on: May 27, 2020, 01:34:07 PM »

.
Logged

Giving your mom a tuneup
Garbus19
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 14


« Reply #2 on: May 28, 2020, 12:32:52 AM »

Hello, I know this is a stupid question but I have to read the file from the ECU I am a beginner in these matters greetings.
Logged
adam-
Hero Member
*****

Karma: +123/-33
Offline Offline

Posts: 2179


« Reply #3 on: May 28, 2020, 12:41:02 AM »

Also this:
Validation failed, ECU reports RequestUpload service is not supported. RequestUpload may have been disabled by aftermarket engine software.
Logged
Garbus19
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 14


« Reply #4 on: May 28, 2020, 09:27:31 AM »

Hello, yes, the car is after the chip, but not too good because I have the ignition and a high charge around 3000 rpm and then it falls down. I bought one after the chip and I want to bring it all right, but I can't read the ecu file. Can anyone help me? I will add logs.
http://vaglogi.pl/log-115_118_lfEVrc6.html
http://vaglogi.pl/log-003_032_cQy96.html
http://vaglogi.pl/log-002_033_UkM82c.html
http://vaglogi.pl/log-002_020_tG0Xd.html
Logged
Jorgeminator
Jr. Member
**

Karma: +8/-0
Offline Offline

Posts: 27

Golf MkIV 1.8T AUM


« Reply #5 on: May 28, 2020, 10:01:41 AM »

Come on... both Marty and adam- already told you why the file can't be read.
Logged
Garbus19
Newbie
*

Karma: +0/-4
Offline Offline

Posts: 14


« Reply #6 on: May 28, 2020, 11:58:51 AM »

So the file will not read because someone protected it from copying and I can even upload the original soft or go to the tuner to do everything again or I need to look for a second ECU.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2796



« Reply #7 on: May 28, 2020, 01:43:33 PM »

Hello, yes, the car is after the chip, but not too good because I have the ignition and a high charge around 3000 rpm and then it falls down. I bought one after the chip and I want to bring it all right, but I can't read the ecu file. Can anyone help me? I will add logs.
http://vaglogi.pl/log-115_118_lfEVrc6.html
http://vaglogi.pl/log-003_032_cQy96.html
http://vaglogi.pl/log-002_033_UkM82c.html
http://vaglogi.pl/log-002_020_tG0Xd.html
Logged

Giving your mom a tuneup
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2796



« Reply #8 on: May 28, 2020, 01:44:34 PM »

OPEN THE ECU AND TAKE PICTURES OF THE FLASH CHIP
Logged

Giving your mom a tuneup
bamofo
Sr. Member
****

Karma: +34/-3
Offline Offline

Posts: 420


« Reply #9 on: May 28, 2020, 01:58:27 PM »

OPEN THE ECU AND TAKE PICTURES OF THE FLASH CHIP

Marty how did you get to -222??

Topic response: bootmode read and get a galletto cable. or just get Galletto 1260 clone and be done.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)