Load to kPa (vvt maps)

Pages: [1]

« previous next »

Author

Topic: Load to kPa (vvt maps) - MKV R32 VR6 (Read 4325 times)

ricekikr

Full Member

Karma: +2/-0
Offline

Offline

Posts: 104

	Load to kPa (vvt maps) - MKV R32 VR6 « on: June 04, 2020, 10:43:59 PM »

Edit: MKV R32 VR6 (proj attached on post #3)

Using the data for a standalone. What would be the best way to convert the VVT maps at idle/decel/cruise/WOT. (ie, just go diagonally at it the whole map or just use 109%). Doesn'0t need to be 100% but close enough to save time tuning. Mostly interested in idle and WOT

Does 109% load = WOT or is it just a calculated load?

1. 100+% = WOT
2. 50% = WOT but a low airflow

====
3. Why does the Exhaust VVT jump from a positive > negative > positive same rpm different load? (2nd pic)
4. Why doesn't the values coincide with the Study guide (full advance below 1200rpm then base than advance near redline)? (3rd pic)


« Last Edit: June 05, 2020, 11:21:11 PM by ricekikr »	Logged

adam-

Hero Member

Karma: +123/-33
Offline

Offline

Posts: 2179

	Re: Load to kPa (vvt maps) « Reply #1 on: June 05, 2020, 03:56:34 AM »

What ECU? Single stage VVT should only have -18 and 22, nothing in between.


	Logged

ricekikr

Full Member

Karma: +2/-0
Offline

Offline

Posts: 104

	Re: Load to kPa (vvt maps) « Reply #2 on: June 05, 2020, 09:06:03 AM »

From a Mk5 R32, full range VVT on int&exh

KFNWSA and KFNWSE are the main maps right? Every other vvt maps are just corrections for various conditions?

==
Will be installed on 3.6 vr6, but couldn't find definition files for it. I believe any 2006+ vr6 have very similar operation and range. Just need something to start on, will tune from there.

Attached OLS proj. Got it somewhere on this site.


« Last Edit: June 05, 2020, 09:10:47 AM by ricekikr »	Logged

curamrdan

Full Member

Karma: +4/-1
Offline

Offline

Posts: 128

	Re: Load to kPa (vvt maps) - MKV R32 VR6 « Reply #3 on: June 07, 2020, 03:28:00 PM »

I think you can roughtly load=kpa here. So 50% is not wot, just cruise area.Highest tree or four rows are same to have some histeresis for WOT.
Also there is set value for reference camshaft angle value(can differ on intake/exhaust), so it will be as zero for your standalone (means mechanical position, vvt not active) and count movement degree from them. So WNWSE(A)APP values in this file.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 09:58:50 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search