Pages: [1] 2
Author Topic: 1.8t 4b0906018DC ps_w not follow ActualBoost after 6000rpm  (Read 10284 times)
bandyta928
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 74


« on: June 14, 2020, 05:15:04 AM »

Hallo, I try to adjust my MAF because after 6000rpm ps_w not follow ActualBoost. Difference is 0.2bar. Should I change KFKHFM. Y axis in KFKHFM is load or flow?
Logged
bandyta928
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 74


« Reply #1 on: June 14, 2020, 05:16:17 AM »

Hallo, I try to adjust my MAF because after 6000rpm ps_w not follow ActualBoost. Difference is 0.2bar. Should I change KFKHFM. Y axis in KFKHFM is load or flow?
https://log.tunezilla.com/chart/414037#H8KLCADDgRDDpl4CA8KLwo5Ww4rDiExJw5VNSSxJLE4tUcOSMQDDgsKSwqLDksOUWB1MGUPCnDImOGVMccOKwpjDocKUMcOHKWPCoMKTwpbCmFPCnBobCwATRsOpw7fCuAAAAA==
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #2 on: June 14, 2020, 09:47:11 AM »

Please follow forum rules and post original ME7L logs

http://nefariousmotorsports.com/forum/index.php?topic=5954.0title='

and who still uses bmps lol
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
bandyta928
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 74


« Reply #3 on: June 14, 2020, 12:57:59 PM »

Please follow forum rules and post original ME7L logs

http://nefariousmotorsports.com/forum/index.php?topic=5954.0title='

and who still uses bmps lol

I do Smiley
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #4 on: June 14, 2020, 01:43:28 PM »

I don't even know where to start.

Why are you worried about 6000rpm?

Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #5 on: June 14, 2020, 01:51:59 PM »

http://nefariousmotorsports.com/forum/index.php?topic=7302.msg67634#msg67634
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
bandyta928
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 74


« Reply #6 on: June 14, 2020, 02:08:35 PM »

I am worried coz after 6000rpm ps_w not follow pvdks_w. It's not slighty below like it should be and I dont know if i screwed sth with MAF calibration.
Logged
bandyta928
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 74


« Reply #7 on: June 14, 2020, 02:18:01 PM »


yeah I have only one DTC and it's 18058 Missing Message from Instrument Cluster

need to fix it
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #8 on: June 14, 2020, 02:20:23 PM »

I am worried coz after 6000rpm ps_w not follow pvdks_w. It's not slighty below like it should be and I dont know if i screwed sth with MAF calibration.

ignore that until you fix your other problems. One thing at a time. At your completely fucked boost levels it is literally pointless to worry about ps_w as it isn't even close to being in the operating range that you want anyway.

You're literally worrying about the wrong thing.

Always start with the things you know are broken. Ignore everything else. Fix them, one at a time, DTCs are a priority. Don't be cheap. Don't be lazy. Don't work around them with some halfassed bullshit or an excuse. If you can't figure out how to fix those, or can't afford to, or are too lazy to, ditch the car.
« Last Edit: June 14, 2020, 02:23:44 PM by nyet » Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
bandyta928
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 74


« Reply #9 on: June 14, 2020, 02:45:11 PM »

ignore that until you fix your other problems. One thing at a time. At your completely fucked boost levels it is literally pointless to worry about ps_w as it isn't even close to being in the operating range that you want anyway.

You're literally worrying about the wrong thing.

Always start with the things you know are broken. Ignore everything else. Fix them, one at a time, DTCs are a priority. Don't be cheap. Don't be lazy. Don't work around them with some halfassed bullshit or an excuse. If you can't figure out how to fix those, or can't afford to, or are too lazy to, ditch the car.

My engine is ANB and I swaped ME7 from AWT thats why I got cluster DTC. Should I disable P1650? Scalar 0x10852 to 0.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #10 on: June 14, 2020, 02:56:14 PM »

What scalar is at that address?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
bandyta928
Full Member
***

Karma: +1/-5
Offline Offline

Posts: 74


« Reply #11 on: June 14, 2020, 03:02:46 PM »

Powertrain Data Bus: Missing Message from Instrument Cluster P1650. Adaptation doesnt work.
Logged
Blazius
Hero Member
*****

Karma: +89/-40
Offline Offline

Posts: 1282



« Reply #12 on: June 14, 2020, 05:34:14 PM »

That boost spike @ 3k oughta bend a rod if you keep it like that Cheesy
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #13 on: June 14, 2020, 05:41:14 PM »

Powertrain Data Bus: Missing Message from Instrument Cluster P1650. Adaptation doesnt work.

What makes you think disabling the DTC is going to prevent B_brlmx from being set? All it does is disable *reporting* of the DTC, which is pointless (assuming that is what the scalar you posted does, you didn't say).

Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #14 on: June 14, 2020, 05:42:31 PM »

That boost spike @ 3k oughta bend a rod if you keep it like that Cheesy

It only looks bad because his req boost is 9psi lol.

Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 18 queries. (Pretty URLs adds 0s, 0q)