NefMoto > Technical > Flashing and Chipping > File Protection Removal/Overwrite
Pages: [1]
« previous next »
Author Topic: File Protection Removal/Overwrite  (Read 5371 times)
armaan
Full Member
***

Karma: +6/-15
Offline Offline

Posts: 97
« on: June 14, 2020, 02:35:21 PM »
Hi everyone,

I recently purchased a Mk5 GTI 2.0TFSI (AXX engine) (Ecu: 1K0907115)
Did proper maintenance, oils, filters, the essentials.

My car has nearly 6degrees of timing pull on WOT. Angry
I am fed up and I want to read and make my own file.
I have read the file off the ecu, via OBD using MPPS, and when I compare it with another same 1K0907115 file, it lines up well, but some of the addresses are missing/blanked off, along with the data. Theres FF's where I wouldnt expect and basically alot of the data seems 'blocked off' or 'encrypted'. I cant see any legible LDRXN at 0x1CD860 though I can clearly see its RPM axis at 0x1CD840. Though I managed to see LAMFA and its axis. Huh

It would be great to get your help around this issue. Smiley

What should I do to be able to read the whole file with the missing/encrypted bits? or if I cant,
What if I flash on another stock file from same ecu but different car (attached), would it work? That way I can get working on it atleast.

or any other solutions if you may suggest would be great.
Thanks
Logged
It is indeed a difference of perception that brings about our and others reality.
IamwhoIam
Hero Member
*****

Karma: +52/-114
Offline Offline

Posts: 1070
« Reply #1 on: June 15, 2020, 01:13:11 PM »
Whoever has "done" this file deserves to have his eyes and fingers surgically removed and should perish in the flames of a napalm bomb. Can I have my 40 seconds of scrolling through changes back please?

The reason why you can't see LDRXN legibly because you haven't heard of small endian/big endian most likely.
Logged
I have no logs because I have a boost gauge (makes things easier)
armaan
Full Member
***

Karma: +6/-15
Offline Offline

Posts: 97
« Reply #2 on: June 19, 2020, 01:20:20 PM »
Quote from: IamwhoIam on June 15, 2020, 01:13:11 PM
Whoever has "done" this file deserves to have his eyes and fingers surgically removed and should perish in the flames of a napalm bomb. Can I have my 40 seconds of scrolling through changes back please?

The reason why you can't see LDRXN legibly because you haven't heard of small endian/big endian most likely.

Hey, thanks for your reply and for your hints. I understand your frustration, I think.

Will check out these Endians and hope to learn.

But are you able to tell if I flash on a stock file (I will buy off a seller), will it brick the ecu? or will just flash on ok?

Thanks
Logged
It is indeed a difference of perception that brings about our and others reality.
IamwhoIam
Hero Member
*****

Karma: +52/-114
Offline Offline

Posts: 1070
« Reply #3 on: June 20, 2020, 01:21:09 AM »
Why would you need to BUY a stock file?
Logged
I have no logs because I have a boost gauge (makes things easier)
IamwhoIam
Hero Member
*****

Karma: +52/-114
Offline Offline

Posts: 1070
« Reply #4 on: June 20, 2020, 01:36:38 AM »
Your "tune" is done by someone so retarded, that any concept of "protection" is totally unknown to them. Methinks he must be a failed butcher or builder who thought he'd jump on the tuning bandwagon.

The 1K0907115.bin file is bone stock and can be flashed without any problems.
Logged
I have no logs because I have a boost gauge (makes things easier)
armaan
Full Member
***

Karma: +6/-15
Offline Offline

Posts: 97
« Reply #5 on: June 20, 2020, 10:39:20 AM »
Quote from: IamwhoIam on June 20, 2020, 01:36:38 AM
Your "tune" is done by someone so retarded, that any concept of "protection" is totally unknown to them. Methinks he must be a failed butcher or builder who thought he'd jump on the tuning bandwagon.

The 1K0907115.bin file is bone stock and can be flashed without any problems.

Thanks for that.
Thats basically I needed, Will flash the stock file on, and get to work making my own file.
This car was actually imported from Singapore (yep importing euro cars from Jap or Singapore is actually a thing where I am)

And it came with this. So far have been able to chop DSG Mk5s left and right.
I could tell from the KFZWOP, KFZW, KFLDHBN, that this person really didnt know what they are doing, and it explains the timing retardation on my car.

Thanks a lot.  Smiley
Logged
It is indeed a difference of perception that brings about our and others reality.
cherry
Sr. Member
****

Karma: +26/-2
Offline Offline

Posts: 260
« Reply #6 on: June 20, 2020, 03:53:34 PM »
Do not flash complete file to ecu or you will brick immodata. 6C00-6FFF is unique data. It seems your tool read/flash from 20000 up, so no problem. But with some tools it´s also possible to force a full flash, and then your immodata is lost, you need to rebuild ecu then. Especially without full flash...
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-114
Offline Offline

Posts: 1070
« Reply #7 on: June 22, 2020, 12:30:11 AM »
Quote from: cherry on June 20, 2020, 03:53:34 PM
Do not flash complete file to ecu or you will brick immodata. 6C00-6FFF is unique data. It seems your tool read/flash from 20000 up, so no problem. But with some tools it´s also possible to force a full flash, and then your immodata is lost, you need to rebuild ecu then. Especially without full flash...

If he's flashing OBD there's ZERO chances of anything going wrong with 6C00-6FFF as that is NOT an OBD flashable area.
Logged
I have no logs because I have a boost gauge (makes things easier)
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 387
« Reply #8 on: June 22, 2020, 11:18:40 AM »
Quote from: IamwhoIam on June 22, 2020, 12:30:11 AM
If he's flashing OBD there's ZERO chances of anything going wrong with 6C00-6FFF as that is NOT an OBD flashable area.

Agree, but read in several fóruns people having issues, mainly with cloned tools... perhaps corrupted eeprom?
Logged
cherry
Sr. Member
****

Karma: +26/-2
Offline Offline

Posts: 260
« Reply #9 on: June 22, 2020, 11:25:53 AM »
Ah ok, did not know that it´s not obd writeable. Never tested this, i use ori MPPS and ori EVC BDM for these ecu...
Logged
armaan
Full Member
***

Karma: +6/-15
Offline Offline

Posts: 97
« Reply #10 on: June 22, 2020, 12:14:14 PM »
@cherry @IamWhoIam & @overspeed.

Thanks a lot for your help.  Smiley
Logged
It is indeed a difference of perception that brings about our and others reality.
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 09:28:43 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 16 queries. (Pretty URLs adds 0s, 0q)