NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > Having trouble with the maps
Pages: [1]
« previous next »
Author Topic: Having trouble with the maps  (Read 4031 times)
david8190
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 9
« on: July 08, 2020, 11:43:14 PM »
on tuner studios im using the 1.8t xdf and my file. The numbers on the maps make no sense. I think its a setting issue of someone could help me sort this out that would be great. Can give pictures if you feel like you could help. Thank you.
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179
« Reply #1 on: July 09, 2020, 12:15:17 AM »
You have to use a matching XDF/.bin.  Files have maps in different locations in different files. 
Logged
david8190
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 9
« Reply #2 on: July 09, 2020, 06:53:25 AM »
Quote from: adam- on July 09, 2020, 12:15:17 AM
You have to use a matching XDF/.bin.  Files have maps in different locations in different files. 

Im using my 8D0 907 557 bin. The xdf is 8D0 907 551.
These should be the same shouldn't they?
If not im having toeuble finding the right xdf.
Any help?
Logged
david8190
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 9
« Reply #3 on: July 09, 2020, 07:15:17 AM »
how do i add photos? im new to forums. ill show you what i mean
Logged
fknbrkn
Hero Member
*****

Karma: +186/-24
Offline Offline

Posts: 1455


mk4 1.8T AUM
« Reply #4 on: July 09, 2020, 07:32:59 AM »
So you're using 2.7bt xdf on dbc 1.8t file
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12270


WWW
« Reply #5 on: July 09, 2020, 08:52:16 AM »
Quote from: david8190 on July 09, 2020, 07:15:17 AM
how do i add photos? im new to forums. ill show you what i mean

Don't need to add a picture to know that 8D0 907 557 != 8D0 907 551.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
david8190
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 9
« Reply #6 on: July 09, 2020, 09:12:44 AM »
Quote from: fukenbroken on July 09, 2020, 07:32:59 AM
So you're using 2.7bt xdf on dbc 1.8t file


Can you point me in the right direction to the correct xdf? Please
Logged
Sandstorm3k
Sr. Member
****

Karma: +10/-14
Offline Offline

Posts: 402
« Reply #7 on: July 09, 2020, 11:50:02 AM »
http://nefariousmotorsports.com/forum/index.php?topic=9116.0
Logged
david8190
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 9
« Reply #8 on: July 09, 2020, 11:56:04 AM »
Quote from: Sandstorm3k on July 09, 2020, 11:50:02 AM
http://nefariousmotorsports.com/forum/index.php?topic=9116.0


Thank you so much!
Logged
david8190
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 9
« Reply #9 on: July 09, 2020, 04:26:19 PM »
This is xdf is hard to use. i cant figure out the conversions. is there anything else i can do? it has only 2 or 3 maps but the conversions dont make sense to me. sorry im new to this stuff. It has a map for engine load and RPMs which im guessing is fuel but the numbers in it dont make sense. the x and y values do now though.
Logged
justinvw2646
Full Member
***

Karma: +17/-3
Offline Offline

Posts: 192
« Reply #10 on: July 09, 2020, 05:08:40 PM »
Can you flash me5.9? I think they need a different socket soldered to the board in the ecu???
« Last Edit: July 09, 2020, 05:18:15 PM by justinvw2646 » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 09:24:03 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 16 queries. (Pretty URLs adds 0s, 0q)