please could i have some help with Eskonf ?

Pages: [1]

« previous next »

Author

Topic: please could i have some help with Eskonf ? (Read 2977 times)

Maddog82

Jr. Member

Karma: +0/-2
Offline

Offline

Posts: 39

	please could i have some help with Eskonf ? « on: July 09, 2020, 01:01:06 PM »

hi to all
I'm struggling with this narrowband ECU (06A906032AR) to make sense of how to remove SAI, EVAP, and N249.
Ive looked on the S4 wiki but i cant understand as its different in the file to what ive altered before on HJ and HN Bins,

so is there anyone who would be able to help me out, please?
Bin is attached
many thanks in advance


	Logged

I'm all about development.

justinvw2646

Full Member

Karma: +17/-3
Offline

Offline

Posts: 192

	Re: please could i have some help with Eskonf ? « Reply #1 on: July 09, 2020, 03:37:56 PM »

I will take a look when I get home tonight, but removal of the N249 is a bad idea. http://nefariousmotorsports.com/forum/index.php?topic=3828.0

Take note of who is giving the guy a hard time....those guys know their stuff, if it didn’t matter they would say so....fwiw


	Logged

Maddog82

Jr. Member

Karma: +0/-2
Offline

Offline

Posts: 39

	Re: please could i have some help with Eskonf ? « Reply #2 on: July 09, 2020, 03:48:11 PM »

many thanks,


	Logged

I'm all about development.

justinvw2646

Full Member

Karma: +17/-3
Offline

Offline

Posts: 192

	Re: please could i have some help with Eskonf ? « Reply #3 on: July 09, 2020, 04:32:06 PM »

a screenshot of the output from me7eskonf....I renamed your file ori because you have to specify the bin in command prompt, but the screenshot is indeed from the bin you posted.


	Logged

justinvw2646

Full Member

Karma: +17/-3
Offline

Offline

Posts: 192

	Re: please could i have some help with Eskonf ? « Reply #4 on: July 09, 2020, 04:44:46 PM »

It gives you two addresses so you will have to determine which is correct based on factory installed equipment. One difference I noticed was "BKV". If you DO NOT have an electric brake vacuum pump (manual transmission) the upper address in the screenshot will be correct for your bin. If you HAVE an electric brake vacuum pump (automatic transmission) the lower address in the screenshot will be correct for your bin. Hope this helps.


	Logged

Maddog82

Jr. Member

Karma: +0/-2
Offline

Offline

Posts: 39

	Re: please could i have some help with Eskonf ? « Reply #5 on: July 10, 2020, 01:43:26 AM »

Thats super. Thank you very much


	Logged

I'm all about development.

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 11:57:51 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search